Model-specific code library

Samsung cooktop error codes.

We decode 10 cooktop codes and messages, each with its own anchored row.

Cooktop code finder

A2 on a Samsung induction cooktop is DC motor locking: the DC motor cannot operate because of defects in the PCB or wiring, or a blockage of the motor blade.

Read the A2 checks
Or choose

12 researched cooktop codes. A Samsung code can mean different things on different models, so trust the booklet for yours.

Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Messages with a manual behind them.

A2

Fan and airflow

A2 on a Samsung induction cooktop is DC motor locking: the DC motor cannot operate because of defects in the PCB or wiring, or a blockage of the motor blade.

Technician visit
C0

Sensors

C0 on a Samsung induction cooktop means the top sensor is open or shorted while the burner is operating. Turn the cooktop off and restart; unplug for 30 seconds if it continues.

Technician visit
C1

Heating

C1 on a Samsung induction cooktop means the internal temperature of a burner rose abnormally high. Turn the cooktop off and restart.

Technician visit
C2

Sensors

C2 on a Samsung induction cooktop means the IGBT sensor is open or shorted while the burner is operating. Turn the cooktop off and restart.

Technician visit
d0

User interface

d0 on a Samsung NZ30K7880U* or NZ30A3060UK induction cooktop reports a key that stayed down for more than 8 seconds. Check for a wet key pad or a pressed-in key, then restart using the POWER key.

Check, then book
F0

Control board

F0 on a Samsung induction cooktop means communication between the main and sub PCBs failed. Restart with the POWER key; disconnect power for more than 30 seconds if it continues.

Technician visit
F1

Control board

F1 on a Samsung induction cooktop means communication between main and EEP-ROM failed. Restart with the POWER key.

Technician visit
F2

Control board

F2 on a Samsung induction cooktop means the touch-enabled IC communicates abnormally. Restart with the POWER key.

Technician visit
H

Mode, not a failure

An H or h on a Samsung induction cooktop display shows leftover warmth. The zone is off, yet the glass can still burn, so keep your hands and towels clear. The mark disappears only after the zone has cooled. Nothing is wrong.

Not a failure
L

Mode, not a failure

When L shows on a Samsung induction cooktop, it means the child lock is engaged. Touching the zones does nothing until you unlock. Hold the Lock key for about 3 seconds, wait for the beep, and the cooktop responds again.

Not a failure
underlined u

Information

The underlined u on a Samsung induction cooktop is a Pan Detection Error: the cookware is unsuitable (size, material, placement), so the pan will not heat. If not corrected the element turns off after 1 minute.

Check, then book
UP

Power supply

UP on a Samsung induction cooktop means the supply voltage is too high or low. Check the power connection and turn the appliance on after regulating the voltage (208 V to 240 V).

Check, then book

The NZ30K7880U and NZ30A3060UK manuals print nine text codes. The hot-surface symbols H and L are display symbols we could not read as text, so they are not decoded.

Start with the model boundary.

Cooktops in a thoughtfully designed home

Samsung induction cooktop codes come from two manuals.

We decode 10 cooktop codes and messages, each with its own anchored row.

The NZ30K7880U and NZ30A3060UK manuals print nine text codes. The hot-surface symbols H and L are display symbols we could not read as text, so they are not decoded.

Choose the next safe action.

Read the whole display

Give the exact string and the model number on the label.

Respect the service boundary

Switch the breaker off before you reach under the cooktop. A cooking zone can stay hot after it is switched off.

Documents checked for this library.

  • Samsung range or wall oven error codes
  • Electric Cooktop User manual NZ30K7880U*
  • Electric Cooktop User manual NZ30A3060UK

Follow the user manual for your exact model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Are these cooktop meanings universal?

The NZ30K7880U and NZ30A3060UK manuals print nine text codes. The hot-surface symbols H and L are display symbols we could not read as text, so they are not decoded.

Which details go with a cooktop code when I write in?

Take one clear photo of the whole cooktop screen and another of the model label. Note what the appliance was doing when the message came up, and do not lean on what another appliance's message means.

Why does a cooktop message show up with no meaning listed?

An old search phrase is no proof from the manufacturer. If our cooktop documents never explain a message, we show its name and send you toward help, without blaming any part.

Which cooktop models does each document cover?

Open a manufacturer document from this cooktop library and check that the model on its cover is the one on your label. A different model has its own user manual.

Let’s take care of it.

Smart appliances still
need a steady hand.