What it means
UP on a Samsung induction cooktop means the supply voltage is too high or low. Check the power connection and turn the appliance on after regulating the voltage (208 V to 240 V).
Samsung cooktop UP / Power supply
UP on a Samsung induction cooktop means the supply voltage is too high or low. Check the power connection and turn the appliance on after regulating the voltage (208 V to 240 V).
Also shown as UP
UP on a Samsung induction cooktop means the supply voltage is too high or low. Check the power connection and turn the appliance on after regulating the voltage (208 V to 240 V).
Turn the breaker off before you go under the cooktop; wiring is work for a technician.
UP returns while the supply sits inside that range.
Your Samsung checks, remembered on this device

Compare the display with UP one character at a time: Samsung writes it with a capital U and a capital P.

Look at the power connection.

208 V to 240 V is the range.

Switch it on again.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visitThis is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
For UP, Samsung says the voltage is too high or low, and to turn the appliance on after regulating the voltage (208 V to 240 V).
Read the supporting manualWith UP showing, check the power connection, regulate the voltage to 208 V to 240 V and turn it on.
Read the supporting manualSafety with UP: Mains wiring is for an electrician or technician.
Read the supporting manualRead UP as a capital U and a capital P. No other Samsung induction cooktop row on this site uses those characters, so there is no near neighbor to mix it up with.
Read the supporting manualManufacturer document
Samsung Electronics America (official manual PDF, downloadcenter.samsung.com)
DG68-00823A-09, PDF created 10.12.2024; Warranty (U.S.A) printed on p34 / PDF p34
Manufacturer document
Samsung Electronics America (official manual PDF, downloadcenter.samsung.com)
DG68-01384A, PDF created 14.01.2025; US contact and warranty on p34 / PDF p32
Scope: NZ30A3060UK induction cooktops; NZ30K7880U* 30-inch induction cooktops (US model suffix NZ30K7880US). Source: Electric Cooktop User manual NZ30K7880U*; Electric Cooktop User manual NZ30A3060UK, checked November 2026. The entry used for UP is printed as: "The voltage is too high or low." (O_DG68-00823A-09_IB_FULL_NZ30K7880U_EN, page 34).
Samsung says the voltage is too high or low, and to turn the appliance on after regulating the voltage (208 V to 240 V).
208 V to 240 V.
Read it as a capital U and a capital P. Samsung's induction cooktop list has no other row with these characters.
Book a visit with us if the voltage is right and the code stays.
Samsung codes, symptoms, parts, house calls
The underlined u on a Samsung induction cooktop is a Pan Detection Error: the cookware is unsuitable (size, material, placement), so the pan will not heat. If not corrected the element turns off after 1 minute.
A Samsung electric cooktop unit that switches on and off is behaving normally, even on high, and does so more with an undersized pan or one with a curved base. A unit that will not hold a rolling boil usually points to the pan or low voltage. Use flat pans that match the unit and cover them with a lid.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.