Before work starts
The cost of the repair is explained to you on site once the technician has diagnosed the appliance, before any part is ordered or fitted.
Independent appliance repair
Book a visit for a Samsung induction cooktop that shows A2, C0, C1, C2, d0, F0, F1, F2, UP or an underlined u. These come from the NZ30K7880U* and NZ30A3060UK manuals and a Samsung support article. We cover no gas cooktop codes, as Samsung prints none.


A Samsung electric cooktop unit that switches on and off is behaving normally, even on high, and does so more with an undersized pan or one with a curved base. A unit that will not hold a rolling boil usually points to the pan or low voltage. Use flat pans that match the unit and cover them with a lid.

When a surface unit on a Samsung electric cooktop stays off, the manual blames a blown fuse, a tripped breaker, or a control meant for a different unit. Reset the breaker, then check that you are using the correct control for the unit you want.
C2 on a Samsung induction cooktop means the IGBT sensor is open or shorted while the burner is operating. Turn the cooktop off and restart.
F0 on a Samsung induction cooktop means communication between the main and sub PCBs failed. Restart with the POWER key; disconnect power for more than 30 seconds if it continues.
A2 on a Samsung induction cooktop is DC motor locking: the DC motor cannot operate because of defects in the PCB or wiring, or a blockage of the motor blade.
C0 on a Samsung induction cooktop means the top sensor is open or shorted while the burner is operating. Turn the cooktop off and restart; unplug for 30 seconds if it continues.
UP on a Samsung induction cooktop means the supply voltage is too high or low. Check the power connection and turn the appliance on after regulating the voltage (208 V to 240 V).
Nothing is named as a part until we have tested the cooktop in place. You see the price and say yes before an order goes in.

C2 on a Samsung NZ30K7880U* or NZ30A3060UK induction cooktop reports that the IGBT sensor is open, or shorted, while a burner is operating. The manual prints the meaning and no steps. Book a technician with us if C2 returns.

F0 on a Samsung NZ30K7880U* or NZ30A3060UK induction cooktop reports that communication between the main and sub PCBs failed. The manual says to restart with the POWER key and disconnect power for more than 30 seconds if it continues.
Booking to repair, step by step.
A photo of the display helps.

Choose the appliance and type the code. A quick photo of the display is the best detail you can give.

The technician checks power, sensors and the control board, then quotes the repair before starting.

The part is fitted, the appliance is tested, and the technician shows you it working.
Note exactly what the cooktop shows, and whether an underlined u is pan detection.
For F0, Samsung says to restart the cooktop with the POWER key.
If a code continues, the manual says to leave power disconnected for more than 30 seconds.
An underlined u is Samsung's pan detection. The element switches off after one minute.
A code returns after the POWER restart and the power disconnect.
C2 or F0 shows.
A burner does not heat with a matching pan in place.
Arrange a diagnosticThe cost of the repair is explained to you on site once the technician has diagnosed the appliance, before any part is ordered or fitted.
Repairs that Samsung’s warranty covers are Samsung’s to do. The repairs we make come with our own warranty on the work.
Samsung's NZ30 induction models, plus gas cooktops by name only; Samsung's gas cooktop manual prints no codes.
A DC motor locking entry in Samsung's table: the DC motor cannot operate because of defects in the PCB or wiring, or a blocked blade.
Yes, on the range page. A cooktop here is a separate unit.
The code on the display, the label model number and the pan you used.
Samsung codes, symptoms, parts, house calls
C2 on a Samsung induction cooktop means the IGBT sensor is open or shorted while the burner is operating. Turn the cooktop off and restart.
A Samsung electric cooktop unit that switches on and off is behaving normally, even on high, and does so more with an undersized pan or one with a curved base. A unit that will not hold a rolling boil usually points to the pan or low voltage. Use flat pans that match the unit and cover them with a lid.
C2 on a Samsung NZ30K7880U* or NZ30A3060UK induction cooktop reports that the IGBT sensor is open, or shorted, while a burner is operating. The manual prints the meaning and no steps. Book a technician with us if C2 returns.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.