What it means
F2 on a Samsung induction cooktop means the touch-enabled IC communicates abnormally. Restart with the POWER key.
Samsung cooktop F2 / Control board
F2 on a Samsung induction cooktop means the touch-enabled IC communicates abnormally. Restart with the POWER key.
Also shown as F2
F2 on a Samsung induction cooktop means the touch-enabled IC communicates abnormally. Restart with the POWER key.
Turn the breaker off before you go under the cooktop; wiring is work for a technician.
F2 returns.
Your Samsung checks, remembered on this device

Compare the display with F2 one character at a time: Samsung writes it with a capital F and the digit 2.

Wipe water off the glass.

Restart.

Leave the power disconnected for more than 30 seconds.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visitThis is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
For F2, Samsung says the touch-enabled IC communicates abnormally.
Read the supporting manualWith F2 showing, restart the appliance using the POWER key; disconnect power for more than 30 seconds if it continues.
Read the supporting manualSafety with F2: Keep the touch panel dry.
Read the supporting manualRead F2 as a capital F and the digit 2. No other Samsung induction cooktop row on this site uses those characters, so there is no near neighbor to mix it up with.
Read the supporting manualManufacturer document
Samsung Electronics America (official manual PDF, downloadcenter.samsung.com)
DG68-00823A-09, PDF created 10.12.2024; Warranty (U.S.A) printed on p34 / PDF p34
Manufacturer document
Samsung Electronics America (official manual PDF, downloadcenter.samsung.com)
DG68-01384A, PDF created 14.01.2025; US contact and warranty on p34 / PDF p32
Scope: NZ30A3060UK induction cooktops; NZ30K7880U* 30-inch induction cooktops (US model suffix NZ30K7880US). Source: Electric Cooktop User manual NZ30K7880U*; Electric Cooktop User manual NZ30A3060UK, checked November 2026.
Samsung says the touch-enabled IC communicates abnormally.
The manual does not say; wiping it is harmless.
Read it as a capital F and the digit 2. Samsung's induction cooktop list has no other row with these characters.
Book a visit with us if it continues.
Samsung codes, symptoms, parts, house calls
The underlined u on a Samsung induction cooktop is a Pan Detection Error: the cookware is unsuitable (size, material, placement), so the pan will not heat. If not corrected the element turns off after 1 minute.
A Samsung electric cooktop unit that switches on and off is behaving normally, even on high, and does so more with an undersized pan or one with a curved base. A unit that will not hold a rolling boil usually points to the pan or low voltage. Use flat pans that match the unit and cover them with a lid.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.