What it means
d0 on a Samsung NZ30K7880U* or NZ30A3060UK induction cooktop reports a key that stayed down for more than 8 seconds. Check for a wet key pad or a pressed-in key, then restart using the POWER key.
Samsung cooktop d0 / User interface
d0 on a Samsung NZ30K7880U* or NZ30A3060UK induction cooktop reports a key that stayed down for more than 8 seconds. Check for a wet key pad or a pressed-in key, then restart using the POWER key.
Also shown as d0
d0 on a Samsung NZ30K7880U* or NZ30A3060UK induction cooktop reports a key that stayed down for more than 8 seconds. Check for a wet key pad or a pressed-in key, then restart using the POWER key.
Turn the breaker off before you go under the cooktop; wiring is work for a technician.
D0 comes back.
Your Samsung checks, remembered on this device

Compare the display with d0 one character at a time: Samsung writes it with a lowercase d and the digit 0.

Wipe off water.

Look for a pressed-in key.

Use the POWER key.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visitThis is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
For d0, Samsung says a key is pressed for more than 8 seconds.
Read the supporting manualWith d0 showing, check if the key pad is wet or a key is depressed. Restart using the POWER key.
Read the supporting manualSafety with d0: Switch off at the breaker before going under the cooktop.
Read the supporting manualOn a small display the 0 in d0 can be taken for O or o. Samsung's induction cooktop list has no row spelled that way, so d0 is the reading to look up. The same characters also appear on a dryer, where Samsung ties it to Door-Related errors. Check which appliance you are standing in front of.
Read the supporting manualManufacturer document
Samsung Electronics America (official manual PDF, downloadcenter.samsung.com)
DG68-00823A-09, PDF created 10.12.2024; Warranty (U.S.A) printed on p34 / PDF p34
Manufacturer document
Samsung Electronics America (official manual PDF, downloadcenter.samsung.com)
DG68-01384A, PDF created 14.01.2025; US contact and warranty on p34 / PDF p32
Scope: NZ30A3060UK induction cooktops; NZ30K7880U* 30-inch induction cooktops (US model suffix NZ30K7880US). Source: Electric Cooktop User manual NZ30K7880U*; Electric Cooktop User manual NZ30A3060UK, checked November 2026.
Samsung says a key is pressed for more than 8 seconds.
That is Samsung's threshold.
On a small display the 0 in d0 can be taken for O or o. Samsung's induction cooktop list has no row spelled that way, so d0 is the reading to look up.
Book a visit with us if it comes back.
Samsung codes, symptoms, parts, house calls
The underlined u on a Samsung induction cooktop is a Pan Detection Error: the cookware is unsuitable (size, material, placement), so the pan will not heat. If not corrected the element turns off after 1 minute.
A Samsung electric cooktop unit that switches on and off is behaving normally, even on high, and does so more with an undersized pan or one with a curved base. A unit that will not hold a rolling boil usually points to the pan or low voltage. Use flat pans that match the unit and cover them with a lid.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.