What it means
C0 on a Samsung induction cooktop means the top sensor is open or shorted while the burner is operating. Turn the cooktop off and restart; unplug for 30 seconds if it continues.
Samsung cooktop C0 / Sensors
C0 on a Samsung induction cooktop means the top sensor is open or shorted while the burner is operating. Turn the cooktop off and restart; unplug for 30 seconds if it continues.
Also shown as C0
C0 on a Samsung induction cooktop means the top sensor is open or shorted while the burner is operating. Turn the cooktop off and restart; unplug for 30 seconds if it continues.
Turn the breaker off before you go under the cooktop; wiring is work for a technician.
C0 continues after that.
Your Samsung checks, remembered on this device

Compare the display with C0 one character at a time: Samsung writes it with a capital C and the digit 0.

Turn the cooktop off, then restart it.

If it continues, unplug the power cord for 30 seconds or more, then reconnect.

Write down which burner was on.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visitThis is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
For C0, Samsung says the top sensor is open, or short, while the burner is operating.
Read the supporting manualWith C0 showing, turn the cooktop off and restart it. If the problem continues, unplug the power cord for 30 seconds or more, then reconnect.
Read the supporting manualSafety with C0: A cooking zone can stay hot after it is switched off. Switch off at the breaker before going under the cooktop.
Read the supporting manualOn a small display the 0 in C0 can be taken for O or o. Samsung's induction cooktop list has no row spelled that way, so C0 is the reading to look up.
Read the supporting manualManufacturer document
Samsung Electronics America (official manual PDF, downloadcenter.samsung.com)
DG68-00823A-09, PDF created 10.12.2024; Warranty (U.S.A) printed on p34 / PDF p34
Manufacturer document
Samsung Electronics America (official manual PDF, downloadcenter.samsung.com)
DG68-01384A, PDF created 14.01.2025; US contact and warranty on p34 / PDF p32
Scope: NZ30A3060UK induction cooktops; NZ30K7880U* 30-inch induction cooktops (US model suffix NZ30K7880US). Source: Electric Cooktop User manual NZ30K7880U*; Electric Cooktop User manual NZ30A3060UK, checked November 2026.
Samsung says the top sensor is open, or short, while the burner is operating.
The top sensor, per Samsung's manual.
On a small display the 0 in C0 can be taken for O or o. Samsung's induction cooktop list has no row spelled that way, so C0 is the reading to look up.
Samsung says to contact a local service center if the problem is not fixed. Book a visit with us.
Samsung codes, symptoms, parts, house calls
The underlined u on a Samsung induction cooktop is a Pan Detection Error: the cookware is unsuitable (size, material, placement), so the pan will not heat. If not corrected the element turns off after 1 minute.
A Samsung electric cooktop unit that switches on and off is behaving normally, even on high, and does so more with an undersized pan or one with a curved base. A unit that will not hold a rolling boil usually points to the pan or low voltage. Use flat pans that match the unit and cover them with a lid.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.