What it means
A2 on a Samsung induction cooktop is DC motor locking: the DC motor cannot operate because of defects in the PCB or wiring, or a blockage of the motor blade.
Samsung cooktop A2 / Fan and airflow
A2 on a Samsung induction cooktop is DC motor locking: the DC motor cannot operate because of defects in the PCB or wiring, or a blockage of the motor blade.
Also shown as A2
A2 on a Samsung induction cooktop is DC motor locking: the DC motor cannot operate because of defects in the PCB or wiring, or a blockage of the motor blade.
Turn the breaker off before you go under the cooktop; wiring is work for a technician.
A2 returns.
Your Samsung checks, remembered on this device

Compare the display with A2 one character at a time: Samsung writes it with a capital A and the digit 2.

Switch off and let it cool.

Make sure vents are not covered.

Restart and see.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visitThis is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Component reference
An internal fan cools the electronics of a Samsung induction cooktop.
Read the definitionFor A2, Samsung says it occurs when the DC motor cannot operate, from defects in the PCB or wiring, or a blocked motor blade.
Read the supporting manualWith A2 showing, turn the cooktop off, let it cool and try again.
Read the supporting manualSafety with A2: Switch off at the breaker and let the cooktop cool before you reach underneath it.
Read the supporting manualRead A2 as a capital A and the digit 2. No other Samsung induction cooktop row on this site uses those characters, so there is no near neighbor to mix it up with.
Read the supporting manualManufacturer document
Samsung Electronics America (official manual PDF, downloadcenter.samsung.com)
DG68-00823A-09, PDF created 10.12.2024; Warranty (U.S.A) printed on p34 / PDF p34
Manufacturer document
Samsung Electronics America (official manual PDF, downloadcenter.samsung.com)
DG68-01384A, PDF created 14.01.2025; US contact and warranty on p34 / PDF p32
Scope: NZ30A3060UK induction cooktops; NZ30K7880U* 30-inch induction cooktops (US model suffix NZ30K7880US). Source: Electric Cooktop User manual NZ30K7880U*; Electric Cooktop User manual NZ30A3060UK, checked November 2026.
Samsung says it occurs when the DC motor cannot operate, from defects in the PCB or wiring, or a blocked motor blade.
The cooling fan motor, per the Fan and airflow family.
Read it as a capital A and the digit 2. Samsung's induction cooktop list has no other row with these characters.
Book a visit with us if it returns.
Samsung codes, symptoms, parts, house calls
The underlined u on a Samsung induction cooktop is a Pan Detection Error: the cookware is unsuitable (size, material, placement), so the pan will not heat. If not corrected the element turns off after 1 minute.
A Samsung electric cooktop unit that switches on and off is behaving normally, even on high, and does so more with an undersized pan or one with a curved base. A unit that will not hold a rolling boil usually points to the pan or low voltage. Use flat pans that match the unit and cover them with a lid.
An internal fan cools the electronics of a Samsung induction cooktop. It starts after you use an element and keeps going until the electronics are cool, so noise after switch-off is normal. A2 means the DC motor locked up, from a board or wiring problem or an obstruction at the blade.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.