Inside the appliance
Dryer lint filter. In plain English.
Samsung's dryer pages send you to the lint filter, also called the lint screen, for the vent-blockage results, the heating errors and the temperature errors. A clogged lint screen or vent trapping heat is the most common cause Samsung names. Clean it first.

Where it fits.
Dryer lint filter in the appliance
Samsung's pages call it the lint screen or lint filter and do not describe its position.
The picture shows a typical example of this component. It does not tell you which replacement fits your model.
What shifts once this system needs attention.
Dryer lint filter problems can arrive with weaker performance or a code that keeps coming back. A component is tested before anyone decides it is to blame.
Owner care, within the model instructions.
Switch the appliance off and unplug it before any check of your own. Look out for pooled water and jagged debris. Never touch a wet plug or an electrical area, take off a service panel or go past what your model's owner instructions allow.
- 1
Clean the lint screen
Samsung names a clogged lint screen, or a vent system that traps heat, as the usual reason for its heating and temperature errors.
- 2
Clean the vent too
Clean the lint screen, the vent system, or both. After a Clg, Cg, C80, C8, C90 or C9 result, Samsung wants the duct run and the lint filter both cleaned.
- 3
Run the test again
If the code continues after cleaning both, Samsung says to request service.
Cleaning or replacement?
Leave internal testing to a technician.
The code or result returns after the lint filter and exhaust vent are clean.
The code returns on the next load after cleaning.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Dryer lint filter advice. Choose the manual that fits your model.
- Samsung dryer displays an error code
- Clothes are not dry after using Samsung dryer
Follow the user manual for your exact model. See how we research these pages.
Is lint screen the same as lint filter?
Samsung uses both words. Its heating and temperature entries say lint screen; its vent-blockage results say lint filter.
Which results point to it?
The vent-blockage results Clg, Cg, C80, C8, C90 and C9, plus the heating and temperature groups.
Is there a cleaning schedule?
Samsung's error entries set none. They ask for cleaning when one of these codes shows.
When should I book?
When the result comes back with a clean lint screen and a clean exhaust duct. Bring the code and model number.
Samsung codes, symptoms, parts, house calls
From the message to what comes next.
Samsung dryer Clg error code
Clg on a Samsung dryer is a Vent Blockage test result, shown only after that test has run. Samsung's list gives the clogged-vent readings and what to clean. Book a technician with us if the result persists after cleaning.
Samsung dryer won't start or spin
Samsung says a dryer that powers on but will not spin usually needs service. Before that, look for an error code, turn off Child Lock (its icon is lit), then run the Time Dry test: if the timer counts down and the drum stays motionless, the dryer needs a technician. If the buttons will not respond at all, Child Lock is the usual reason.
Dryer repair
Book a diagnostic for your exact model, carried out beside the appliance.
Find your metro
Office details, and the access notes to send us.



