Inside the appliance
Dryer exhaust vent. In plain English.
The exhaust vent is the part Samsung's vent blockage test checks. Results Clg and Cg mean clogged, C80 and C8 about 80 percent, C90 and C9 over 90 percent. Samsung says to clean the exhaust vent once or twice a year and keep it free of kinks.

Where it fits.
Dryer exhaust vent in the appliance
Samsung's pages describe the vent as the exhaust path from the dryer; the lengths are in your user manual.
The picture shows a typical example of this component. It does not tell you which replacement fits your model.
What shifts once this system needs attention.
Dryer exhaust vent problems can arrive with weaker performance or a code that keeps coming back. A component is tested before anyone decides it is to blame.
Owner care, within the model instructions.
Switch the appliance off and unplug it before any check of your own. Look out for pooled water and jagged debris. Never touch a wet plug or an electrical area, take off a service panel or go past what your model's owner instructions allow.
- 1
Run the vent test
With the drum cool and empty, press Adjust Time Up and Dry Level until Ins or In shows, then hold Start/Pause. Samsung lists other combinations for some models.
- 2
Read the result
0 or End means the duct is not clogged. Clg, Cg, C80 or C90 means a clog was detected. Ct means wait an hour at room temperature.
- 3
Check the vent itself
Samsung asks for a sealed fit, rigid material rather than plastic or foil, no kinks or flattening, and no more turns than needed.
Cleaning or replacement?
Leave internal testing to a technician.
The vent test still shows a clog after you clean the exhaust vent.
The dryer does not heat even though the vent test passes.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Dryer exhaust vent advice. Choose the manual that fits your model.
- Clothes are not dry after using Samsung dryer
- Samsung dryer displays an error code
Follow the user manual for your exact model. See how we research these pages.
What does Samsung say about vent material?
It should be the proper material, not plastic or foil, fitted and sealed with no gaps where lint could collect.
Why would a dryer stop heating?
Samsung says the dryer may not heat if it detects heat and moisture are not leaving, to prevent overheating and fires in the vent.
How does a turn affect the vent?
Samsung says every 90 degree turn reduces the maximum vent length by 6 feet.
When do I book?
When the vent is clean and the test still fails or the dryer will not heat. Bring the test result.
Samsung codes, symptoms, parts, house calls
From the message to what comes next.
Samsung dryer Clg error code
Clg on a Samsung dryer is a Vent Blockage test result, shown only after that test has run. Samsung's list gives the clogged-vent readings and what to clean. Book a technician with us if the result persists after cleaning.
Samsung dryer won't start or spin
Samsung says a dryer that powers on but will not spin usually needs service. Before that, look for an error code, turn off Child Lock (its icon is lit), then run the Time Dry test: if the timer counts down and the drum stays motionless, the dryer needs a technician. If the buttons will not respond at all, Child Lock is the usual reason.
Dryer repair
Book a diagnostic for your exact model, carried out beside the appliance.
Find your metro
Office details, and the access notes to send us.



