Samsung dryer tE3 / Sensors

Samsung dryer
error tE3

Dryer / display referencetE3

tE3 is a temperature error on a Samsung dryer: a problem with the temperature or with the sensors that measure it. The usual cause is a clogged lint screen or vent. Clean both. Book a technician with us if the code continues.

Also shown as tE3

Last reviewed

Dryer / display referencetE3
Meaning
tE3 is a temperature error on a Samsung dryer: a problem with the temperature or with the sensors that measure it. The usual cause is a clogged lint screen or vent. Clean both. Book a technician with us if the code continues.
Who handles it
Check, then book
Related codes
Source
Samsung dryer displays an error code

What Samsung dryer tE3 means.

What it means

tE3 is a temperature error on a Samsung dryer: a problem with the temperature or with the sensors that measure it. The usual cause is a clogged lint screen or vent. Clean both. Book a technician with us if the code continues.

What you can safely check

Pull the plug before you work near the vent run or a panel.

When to call a technician

TE3 reappears following a thorough clean of the lint screen and ducting.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung dryer tE3: Inside the open door of a front-load dryer, two thin metal sensor bars on the lower front of the drum opening with a few lint strands clinging to them.
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with tE3 one character at a time: Samsung writes it with a lowercase t, a capital E and the digit 3.

  2. Dryers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Clean the lint screen

    Remove lint from the screen and the housing around it.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Clean the vent system

    Clear the exhaust duct and the outside hood of lint. Unplug the dryer first.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Run a short cycle

    After cleaning, run a short cycle and see whether the code returns.

Still showing tE3?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

Heat and its safety limits.

Conceptual Dryer sectionHeaterThermostat / fuseDrumControl1234
  1. 3Drum
  2. 4Control

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Parts behind the message.

A hand pulls a gray mesh lint screen covered in lint out of a white dryer's door opening

Component reference

Dryer lint filter

Samsung's dryer pages send you to the lint filter, also called the lint screen, for the vent-blockage results, the heating errors and the temperature errors.

Read the definition
A hand holds a flexible silver foil dryer duct that curves from a wall vent plate down to the side of a white dryer

Component reference

Dryer exhaust vent

The exhaust vent is the part Samsung's vent blockage test checks.

Read the definition
Inside a dryer drum, a fingertip points at a small round gray sensor cap on the rear wall beside perforated panels

Component reference

Dryer temperature sensor

Samsung's dryer temperature errors reflect an issue with the temperature or with the sensors that measure it.

Read the definition

A little more context.

What is a Samsung dryer reporting with tE3?

For tE3, Samsung says these reflect an issue with the temperature or the sensors that measure it. A clogged lint screen or vent trapping heat is the most common cause.

Read the supporting manual

What should I check before I book a visit?

With tE3 showing, clean the lint screen, the vent system, or both, then run the dryer again.

Read the supporting manual

Can the dryer stay in use while this shows?

Safety with tE3: A blocked vent holds heat in the dryer. Unplug the dryer before you work on the duct, and do not keep running it with the code showing.

Read the supporting manual

How is tE3 different from the codes near it?

AE3 (Communication errors) differs from tE3 by a single character, and Samsung lists it as a separate entry for this dryer.

Read the supporting manual

Why does my display show something like an upside-down F?

Samsung's dryer page notes that if you see something that looks like an upside-down "F," it is meant to be a "t," and to refer to the Temperature errors.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung dryer displays an error code

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-05-04; no printed revision / article

Scope: Samsung dryers, all models unless the article notes otherwise. Source: Samsung dryer displays an error code (Samsung US support article TSG10001006), checked November 2026. The entry used for tE3 is printed as: "Temperature errors (tS, t5, tC, tO, t0, tE, tE3, tC5, tCS, 1 tC, 1tC5, 1tCS)" (TSG10001006, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung dryer reporting with tE3?

Samsung says these reflect an issue with the temperature or the sensors that measure it. A clogged lint screen or vent trapping heat is the most common cause.

What is the upside-down F on the display?

Samsung says an upside-down F on the display is a t. Read it as a lowercase t in the string, for example tC or tE.

Does cleaning really fix a sensor code?

Samsung names a clogged lint screen or vent as the most common cause of the temperature codes, so cleaning is the first step before service.

Why does the vent matter for a temperature code?

Samsung says a clogged lint screen or vent trapping heat is the most common cause. Clearing both is the first step before service.

How often should the vent be cleaned?

Samsung's dryer guide suggests once or twice each year, whether or not you have problems. That guide is a separate article.

How should I read tE3 on the display?

Read it as a lowercase t, a capital E and the digit 3. Samsung's dryer list has no other row with these characters.

The first character looks like an upside-down F. Is it a t code?

Samsung says something that looks like an upside-down "F" is meant to be a "t", so read it as a temperature error and clean the lint screen and the vent system.

Which other strings does Samsung print with it?

Samsung's line for Temperature errors prints 12 strings, and tE3 is number 7, right after tE and right before tC5.

Let’s take care of it.

Smart appliances still
need a steady hand.