What it means
hE is a heating error on a Samsung dryer: it is getting too hot. The most common cause is a clogged lint screen or vent. Clean both. On an electric dryer, low supply voltage can also cause it. Book a technician with us if it continues.
Samsung dryer hE / Heating
hE is a heating error on a Samsung dryer: it is getting too hot. The most common cause is a clogged lint screen or vent. Clean both. On an electric dryer, low supply voltage can also cause it. Book a technician with us if it continues.
Also shown as hE
hE is a heating error on a Samsung dryer: it is getting too hot. The most common cause is a clogged lint screen or vent. Clean both. On an electric dryer, low supply voltage can also cause it. Book a technician with us if it continues.
Pull the plug before you work near the vent run or a panel.
HE reappears following a thorough clean of the lint screen and ducting.
Your Samsung checks, remembered on this device

Compare the display with hE one character at a time: Samsung writes it with a lowercase h and a capital E.

Remove lint from the screen and from the housing around it.

Clear the exhaust duct from the dryer to the outside. Unplug the dryer before you move it.

On an electric dryer, an electrician can check the voltage supplied to the outlet; low voltage is one cause Samsung lists.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visit
This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Component reference
Samsung's dryer pages send you to the lint filter, also called the lint screen, for the vent-blockage results, the heating errors and the temperature errors.
Read the definition
Component reference
The exhaust vent is the part Samsung's vent blockage test checks.
Read the definition
Component reference
Samsung's dryer heating errors are HC, hE, HC4 and 1 HC, and they mean the dryer is getting too hot.
Read the definitionFor hE, Samsung says the dryer is getting too hot, most often because a clogged lint screen or vent traps heat. Sometimes the heater is not hot enough, which can come from low voltage on electric dryers.
Read the supporting manualWith hE showing, clean the lint screen and the vent system. If the dryer is electric, an electrician should check the voltage supplied to it.
Read the supporting manualSafety with hE: Overheating plus lint is a fire risk. Stop using the dryer until the lint screen and vent are clean, and do not leave it running unattended while the code keeps coming up.
Read the supporting manualThe same characters also appear on a dishwasher, where Samsung ties it to Heater error; and on a washer, where Samsung ties it to Heater Error. Check which appliance you are standing in front of.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-04; no printed revision / article
Scope: Samsung dryers, all models unless the article notes otherwise. Source: Samsung dryer displays an error code (Samsung US support article TSG10001006), checked November 2026. The entry used for hE is printed as: "Heating errors (HC, hE, HC4, 1 HC)" (TSG10001006, web article).
Samsung says the dryer is getting too hot, most often because a clogged lint screen or vent traps heat. Sometimes the heater is not hot enough, which can come from low voltage on electric dryers.
Samsung says the dryer is getting too hot, but also notes the error can occur when the heater is not hot enough, for example from low voltage on an electric dryer.
Samsung says to contact an electrician to check the voltage supplied to an electric dryer.
Samsung's wording is that the dryer is getting too hot. It also notes the error can occur when the heater is not hot enough, for example from low voltage on an electric dryer.
Samsung says to contact an electrician to check the voltage supplied. Supply voltage is household wiring, not something the dryer owner adjusts.
The same characters also appear on a dishwasher, where Samsung ties it to Heater error; and on a washer, where Samsung ties it to Heater Error. Check which appliance you are standing in front of.
Book a visit with us if the code continues after the lint screen and vent are cleaned and, on an electric dryer, the voltage is confirmed.
Samsung's line for Heating errors prints 4 strings in this order: HC, hE, HC4, 1 HC. hE is number 2 of them.
Samsung codes, symptoms, parts, house calls
HC is a heating error on a Samsung dryer: it is getting too hot. The most common cause is a clogged lint screen or vent. Clean both. On an electric dryer, low supply voltage can also cause it. Book a technician with us if it continues.
Samsung says a dryer that powers on but will not spin usually needs service. Before that, look for an error code, turn off Child Lock (its icon is lit), then run the Time Dry test: if the timer counts down and the drum stays motionless, the dryer needs a technician. If the buttons will not respond at all, Child Lock is the usual reason.
Samsung's dryer pages send you to the lint filter, also called the lint screen, for the vent-blockage results, the heating errors and the temperature errors. A clogged lint screen or vent trapping heat is the most common cause Samsung names. Clean it first.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.