Cg is a Vent Blockage test result on a Samsung dryer: the vent is clogged and the duct system cannot exhaust properly. Clean the lint filter and the exhaust vent, then run the test again. Book a technician with us if Cg returns after cleaning.
Cg is a Vent Blockage test result on a Samsung dryer: the vent is clogged and the duct system cannot exhaust properly. Clean the lint filter and the exhaust vent, then run the test again. Book a technician with us if Cg returns after cleaning.
Cg is a Vent Blockage test result on a Samsung dryer: the vent is clogged and the duct system cannot exhaust properly. Clean the lint filter and the exhaust vent, then run the test again. Book a technician with us if Cg returns after cleaning.
What you can safely check
Pull the plug before you work near the vent run or a panel.
When to call a technician
The same result returns after the lint filter and vent are clean.
Your Samsung checks, remembered on this device
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Read the display
Compare the display with Cg one character at a time: Samsung writes it with a capital C and a lowercase g.
Illustration. Follow your model’s instructions.
Check 2
Clean the lint filter
Pull the lint filter and remove all lint from it and from the slot it sits in.
Illustration. Follow your model’s instructions.
Check 3
Clean the exhaust vent
Disconnect the duct from the back of the dryer and clear it to the outside wall. Unplug the dryer first.
Illustration. Follow your model’s instructions.
Check 4
Run the test again
Repeat the Vent Blockage test once the vent is clean to see a better result.
Still showing Cg?
Tell us your model and the checks you have already run, then open your request from this spot.
This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
Parts behind the message.
Component reference
Dryer lint filter
Samsung's dryer pages send you to the lint filter, also called the lint screen, for the vent-blockage results, the heating errors and the temperature errors.
For Cg, Samsung says these codes appear only after a Vent Blockage test. Clg and Cg mean the vent is clogged, C80 and C8 about 80 percent clogged, and C90 and C9 over 90 percent.
With Cg showing, clean the lint filter and the exhaust vent, then run the test again. If laundry is in the drum or the dryer is very cold or hot, fix that first.
Safety with Cg: A clogged vent traps heat and lint, which is a fire risk. Do not run the dryer until the vent is clear, and unplug it before you disconnect the duct.
Read Cg as a capital C and a lowercase g. No other Samsung dryer row on this site uses those characters, so there is no near neighbor to mix it up with.
Samsung's test article groups CLg, Cg, CL9, C9, C80, C8 and C90 as one result: the duct system cannot exhaust properly, and the dryer's exhaust vent needs cleaning.
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-04; no printed revision / article
Manufacturer document
Clothes are not dry after using Samsung dryer
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-05; no printed revision / article
Manufacturer document
Run a Vent Blockage test on your Samsung dryer
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-04; no printed revision / article
Scope: Samsung dryers, all models unless the article notes otherwise. Source: Samsung dryer displays an error code; Clothes are not dry after using Samsung dryer (Samsung US support article TSG10001001, TSG10001006), checked November 2026. The entry used for Cg is printed as: "Clg, Cg: The vent is clogged." (TSG10001006, web article).
Samsung says these codes appear only after a Vent Blockage test. Clg and Cg mean the vent is clogged, C80 and C8 about 80 percent clogged, and C90 and C9 over 90 percent.
When does this kind of code appear?
Samsung says these codes only appear after a Vent Blockage test has been run. They are test readings, not failures found during a normal cycle.
What does Ct mean?
Samsung says Ct means the dryer is below freezing or above 104 degrees F. Wait one hour with the dryer at room temperature and try again.
How should I read Cg on the display?
Read it as a capital C and a lowercase g. Samsung's dryer list has no other row with these characters.
Does Cg say how much of the vent is blocked?
No percentage goes with Cg. Samsung says the vent is clogged. Percentages belong to C80 and C8 (about 80%) and to C90 and C9 (over 90% in the error list, about 90% in the test article).
Which other strings does Samsung print with it?
Samsung's line for Vent Blockage test results prints 2 strings in this order: Clg, Cg. Cg is number 2 of them.