Model-specific code library

Samsung washer Water and drain codes

28 printed codes in this group: 0C, 0E, 1 0C, 1 1C, 1 4C, 1 5C, 1 LC, 1 OC, 14C2, 1C and 18 more.

Gloved hand holding a washer's drain pump filter with lint beside the open lower access door, with a shallow tray of water on a towel
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Water and drain codes

0C

0C is Samsung's overflow error on a washer: there is too much water in the tub. Samsung sends you to the same drain guide as for no-drain codes. Check the drain hose and level, and book a technician with us if it continues.

Check, then book
0E

0E is Samsung's overflow error on a washer: there is too much water in the tub. Samsung sends you to the same drain guide as for no-drain codes. Check the drain hose and level, and book a technician with us if it continues.

Check, then book
1 0C

1 0C is Samsung's overflow error on a washer: there is too much water in the tub. Samsung sends you to the same drain guide as for no-drain codes. Check the drain hose and level, and book a technician with us if it continues.

Check, then book
1 1C

1 1C is listed on Samsung washers as a water level or leakage error: moisture where it does not belong, or a sensor problem. Look for a leak first, then check the hoses and run an empty cycle. Book a technician with us if it persists with no suds.

Check, then book
1 4C

1 4C is Samsung's not-filling error on a washer: water is not entering the tub correctly. Check the hose connections, open both valves fully and check the drain hose depth. Book a technician with us if it persists after a one-minute power-off.

Check, then book
1 5C

1 5C is Samsung's no-drain error on a washer: water is not draining at the right speed, or at all. Samsung points to its drain guide: level washer, drain hose 6 to 8 inches into the pipe and not kinked, pump filter on front loaders.

Check, then book
1 LC

1 LC is listed on Samsung washers as a water level or leakage error: moisture where it does not belong, or a sensor problem. Look for a leak first, then check the hoses and run an empty cycle. Book a technician with us if it persists with no suds.

Check, then book
1 OC

1 OC is Samsung's overflow error on a washer: there is too much water in the tub. Samsung sends you to the same drain guide as for no-drain codes. Check the drain hose and level, and book a technician with us if it continues.

Check, then book
14C2

14C2 is Samsung's hot/cold error on a washer: the cold supply is carrying extremely hot water because the hoses are swapped. Reconnect cold to the cold inlet and hot to the hot inlet. Samsung says service is not needed for it.

Check, then book
1C

1C is listed on Samsung washers as a water level or leakage error: moisture where it does not belong, or a sensor problem. Look for a leak first, then check the hoses and run an empty cycle. Book a technician with us if it persists with no suds.

Check, then book
1E

1E is listed on Samsung washers as a water level or leakage error: moisture where it does not belong, or a sensor problem. Look for a leak first, then check the hoses and run an empty cycle. Book a technician with us if it persists with no suds.

Check, then book
4C

4C is Samsung's not-filling error on a washer: water is not entering the tub correctly. Check the hose connections, open both valves fully and check the drain hose depth. Book a technician with us if it persists after a one-minute power-off.

Check, then book
4C2

4C2 is Samsung's hot/cold error on a washer: the cold supply is carrying extremely hot water because the hoses are swapped. Reconnect cold to the cold inlet and hot to the hot inlet. Samsung says service is not needed for it.

Check, then book
4E

4E is Samsung's not-filling error on a washer: water is not entering the tub correctly. Check the hose connections, open both valves fully and check the drain hose depth. Book a technician with us if it persists after a one-minute power-off.

Check, then book
4E2

4E2 is Samsung's hot/cold error on a washer: the cold supply is carrying extremely hot water because the hoses are swapped. Reconnect cold to the cold inlet and hot to the hot inlet. Samsung says service is not needed for it.

Check, then book
5C

5C is Samsung's no-drain error on a washer: water is not draining at the right speed, or at all. Samsung points to its drain guide: level washer, drain hose 6 to 8 inches into the pipe and not kinked, pump filter on front loaders.

Check, then book
5E

5E is Samsung's no-drain error on a washer: water is not draining at the right speed, or at all. Samsung points to its drain guide: level washer, drain hose 6 to 8 inches into the pipe and not kinked, pump filter on front loaders.

Check, then book
CE

CE is Samsung's hot/cold error on a washer: the cold supply is carrying extremely hot water because the hoses are swapped. Reconnect cold to the cold inlet and hot to the hot inlet. Samsung says service is not needed for it.

Check, then book
LC

LC is listed on Samsung washers as a water level or leakage error: moisture where it does not belong, or a sensor problem. Look for a leak first, then check the hoses and run an empty cycle. Book a technician with us if it persists with no suds.

Check, then book
LC1

LC1 is listed on Samsung washers as a water level or leakage error: moisture where it does not belong, or a sensor problem. Look for a leak first, then check the hoses and run an empty cycle. Book a technician with us if it persists with no suds.

Check, then book
LE

LE is listed on Samsung washers as a water level or leakage error: moisture where it does not belong, or a sensor problem. Look for a leak first, then check the hoses and run an empty cycle. Book a technician with us if it persists with no suds.

Check, then book
nd

nd is Samsung's no-drain error on a washer: water is not draining at the right speed, or at all. Samsung points to its drain guide: level washer, drain hose 6 to 8 inches into the pipe and not kinked, pump filter on front loaders.

Check, then book
nF

nF is Samsung's not-filling error on a washer: water is not entering the tub correctly. Check the hose connections, open both valves fully and check the drain hose depth. Book a technician with us if it persists after a one-minute power-off.

Check, then book
nF1

nF1 is Samsung's hot/cold error on a washer: the cold supply is carrying extremely hot water because the hoses are swapped. Reconnect cold to the cold inlet and hot to the hot inlet. Samsung says service is not needed for it.

Check, then book

Let’s take care of it.

Smart appliances still
need a steady hand.