LE is listed on Samsung washers as a water level or leakage error: moisture where it does not belong, or a sensor problem. Look for a leak first, then check the hoses and run an empty cycle. Book a technician with us if it persists with no suds.
LE is listed on Samsung washers as a water level or leakage error: moisture where it does not belong, or a sensor problem. Look for a leak first, then check the hoses and run an empty cycle. Book a technician with us if it persists with no suds.
Samsung washing machine information and error codes
What Samsung washer LE means.
What it means
LE is listed on Samsung washers as a water level or leakage error: moisture where it does not belong, or a sensor problem. Look for a leak first, then check the hoses and run an empty cycle. Book a technician with us if it persists with no suds.
What you can safely check
Before you look behind a panel, pull the plug and shut both water taps, and mop up any puddle you find.
When to call a technician
No suds show up during the empty cycle and LE still comes back.
Your Samsung checks, remembered on this device
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Read the display
Compare the display with LE one character at a time: Samsung writes it with a capital L and a capital E.
Illustration. Follow your model’s instructions.
Check 2
Look for a leak
Check the floor, the hose connections and the back of the washer for water, including very small drips.
Illustration. Follow your model’s instructions.
Check 3
Check the hoses
Make sure the supply hoses and the drain hose are not kinked. Leave the screw that holds the drain hose to the back panel in place; if the holder is missing, the washer needs service.
Illustration. Follow your model’s instructions.
Check 4
Run an empty cycle
Run a cycle with no detergent or softener and watch for suds. Suds mean too much detergent or a non-HE detergent; repeat empty cycles until they stop, then see whether the code returns.
Still showing LE?
Tell us your model and the checks you have already run, then open your request from this spot.
For LE, Samsung describes it as moisture detected somewhere it does not belong, or a problem with the sensor itself. Small leaks can go unnoticed, and fixing a leak clears the code.
With LE showing, look for a leak, however small. Check that the supply hoses and the drain hose behind the washer are not kinked. Then run an empty cycle with no additives and watch for suds.
Safety with LE: Pull the plug and shut both taps before you look behind the washer, and mop up any water first. If you find a leak, stop using the washer until it is fixed.
Samsung washing machine information and error codes
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article
Scope: Samsung washers, all models unless the article notes otherwise. Source: Samsung washing machine information and error codes (Samsung US support article TSG10000997), checked November 2026. The entry used for LE is printed as: "1E, LE, 1C, LC, LC1, 1 1C, 1 LC: Water level or leakage error" (TSG10000997, web article).
Samsung describes it as moisture detected somewhere it does not belong, or a problem with the sensor itself. Small leaks can go unnoticed, and fixing a leak clears the code.
Can too much detergent cause this code?
Yes, on Samsung's list. Suds during an empty cycle point to too much detergent or a non-HE detergent. Repeat empty cycles until the suds stop, then see whether the code comes back.
What if I find the screw on the drain hose is missing?
Samsung says to put the screw and holder back with any screw that fits. If the holder itself is missing, the washer needs service.
Does LE mean the same on a dishwasher?
The same characters also appear on a dishwasher, where Samsung ties it to Leakage error. Check which appliance you are standing in front of.
Do I need a visit for LE?
Samsung's article sends you to service only when no suds appear in the empty cycle and the code continues. That is the point to book a visit with us.
Which other strings does Samsung print with it?
Samsung's line for Water level or leakage error prints 7 strings in this order: 1E, LE, 1C, LC, LC1, 1 1C, 1 LC. LE is number 2 of them.