What it means
4C2 is Samsung's hot/cold error on a washer: the cold supply is carrying extremely hot water because the hoses are swapped. Reconnect cold to the cold inlet and hot to the hot inlet. Samsung says service is not needed for it.
Samsung washer 4C2 / Water and drain
4C2 is Samsung's hot/cold error on a washer: the cold supply is carrying extremely hot water because the hoses are swapped. Reconnect cold to the cold inlet and hot to the hot inlet. Samsung says service is not needed for it.
Also shown as 4C2
4C2 is Samsung's hot/cold error on a washer: the cold supply is carrying extremely hot water because the hoses are swapped. Reconnect cold to the cold inlet and hot to the hot inlet. Samsung says service is not needed for it.
Before you look behind a panel, pull the plug and shut both water taps, and mop up any puddle you find.
The hoses sit on the right inlets and 4C2 still comes back.
Your Samsung checks, remembered on this device

Compare the display with 4C2 one character at a time: Samsung writes it with the digit 4, a capital C and the digit 2.

Typically blue goes to blue and red to red, so the cold supply reaches the cold inlet and the hot supply the hot inlet.

Make sure the hose from the cold tap is the one on the cold inlet; in some homes the taps are not labeled.

Open both taps fully and run a cycle to confirm the code no longer returns.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visit


This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Component reference
Samsung's washer pages name the supply hoses for the not-filling codes, the water-level or leakage group and the hot/cold error.
Read the definitionFor 4C2, Samsung says water from the cold supply is extremely hot, which happens when cold is connected to hot and hot to cold. Swapping the hoses back fixes it.
Read the supporting manualWith 4C2 showing, shut the taps, then match the hoses to the inlets. Samsung says this typically means blue to blue and red to red. Open the taps and run a cycle.
Read the supporting manualSafety with 4C2: This code is a connection mix-up, not a failing part, so the washer is fine to use once the hoses are right. Let hot water cool before you handle the fittings.
Read the supporting manual8C2 (Mems Sensor Error) differs from 4C2 by a single character, and Samsung lists it as a separate entry for this washer. 9C2 (Voltage error) differs from 4C2 by a single character, and Samsung lists it as a separate entry for this washer.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article
Scope: Samsung washers, all models unless the article notes otherwise. Source: Samsung washing machine information and error codes (Samsung US support article TSG10000997), checked November 2026. The entry used for 4C2 is printed as: "4C2, 4E2, CE, 14C2, nF1: Hot/cold error" (TSG10000997, web article).
Samsung says water from the cold supply is extremely hot, which happens when cold is connected to hot and hot to cold. Swapping the hoses back fixes it.
No. Samsung states this code does not indicate that service is needed; it comes from swapped supply hoses.
Samsung only says to match cold to cold and hot to hot, typically blue and red. If the taps are unlabeled, run the tap alone and feel the water temperature.
Read it as the digit 4, a capital C and the digit 2. Samsung's washer list has no other row with these characters.
Samsung says this code does not call for service. Book a visit with us only if the hoses are right and the code still appears.
Samsung's line for Hot/cold error prints 5 strings in this order: 4C2, 4E2, CE, 14C2, nF1. 4C2 is number 1 of them.
Samsung codes, symptoms, parts, house calls
4E2 is Samsung's hot/cold error on a washer: the cold supply is carrying extremely hot water because the hoses are swapped. Reconnect cold to the cold inlet and hot to the hot inlet. Samsung says service is not needed for it.
Samsung says most washer leaks come from conditions you can correct: a damaged hose or o-ring, debris under the door gasket, a drain hose set too deep or too shallow, a dirty pump filter, too much detergent, or a washer that rests off level. Water dripping from the door after you open it is normal. A leak with the door closed is not.
Samsung's washer pages name the supply hoses for the not-filling codes, the water-level or leakage group and the hot/cold error. Hot goes to the hot inlet, cold to the cold inlet, and neither hose may be bent or kinked. If a code stays after that, book a technician.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.