Model-specific code library

Samsung washer Information codes

11 printed codes in this group: 5d, 5UD, 5Ud5, 7E, C6, Cb, dn, Refill detergent or softener, Sd, SUd and 1 more.

Front-load washer control panel with a round dial and three buttons, a small display showing lit segment marks, and a basket of folded towels on the counter.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Information codes

5d

5d is Samsung's excessive-suds code on a washer: the washer detected over-sudsing and paused to let the suds settle. It continues by itself and needs no service. Samsung ties it to incorrect detergent use.

Information only
5UD

5UD is Samsung's excessive-suds code on a washer: the washer detected over-sudsing and paused to let the suds settle. It continues by itself and needs no service. Samsung ties it to incorrect detergent use.

Information only
5Ud5

5Ud5 is Samsung's excessive-suds code on a washer: the washer detected over-sudsing and paused to let the suds settle. It continues by itself and needs no service. Samsung ties it to incorrect detergent use.

Information only
7E

7E appears on Samsung's list of other washer errors as a SilverCare Error. Samsung gives the name only, with no specific steps. Power the washer off for 2 to 3 minutes, power it on and restart. Book a technician with us if it continues.

Reset, then book
C6

C6 is Samsung's Calibration mode on a washer, not an error. It recalibrates weight detection, runs the drum back and forth for 1 to 3 minutes and ends by itself. The washer must be empty for it to calibrate.

Information only
Cb

Cb is Samsung's Calibration mode on a washer, not an error. It recalibrates weight detection, runs the drum back and forth for 1 to 3 minutes and ends by itself. The washer must be empty for it to calibrate.

Information only
dn

dn on a Samsung washer means it is downloading an update. The controls, including the dial, do not respond while it runs, and it takes about 15 minutes. Book a technician with us only if it shows for more than 30 minutes while powered on.

Information only
Refill detergent or softener

Refill detergent or softener is a message, not an error code, on Samsung washers with an auto dispenser: the dispenser is empty and needs refilling. It clears on the next cycle after you refill the compartments.

Information only
Sd

Sd is Samsung's excessive-suds code on a washer: the washer detected over-sudsing and paused to let the suds settle. It continues by itself and needs no service. Samsung ties it to incorrect detergent use.

Information only
SUd

SUd is Samsung's excessive-suds code on a washer: the washer detected over-sudsing and paused to let the suds settle. It continues by itself and needs no service. Samsung ties it to incorrect detergent use.

Information only
SUdS

SUdS is Samsung's excessive-suds code on a washer: the washer detected over-sudsing and paused to let the suds settle. It continues by itself and needs no service. Samsung ties it to incorrect detergent use.

Information only

Let’s take care of it.

Smart appliances still
need a steady hand.