Samsung washer 14C2 / Water and drain

Samsung washer
error 14C2

Washer / display reference14C2

14C2 is Samsung's hot/cold error on a washer: the cold supply is carrying extremely hot water because the hoses are swapped. Reconnect cold to the cold inlet and hot to the hot inlet. Samsung says service is not needed for it.

Also shown as 14C2

Last reviewed

Washer / display reference14C2
Meaning
14C2 is Samsung's hot/cold error on a washer: the cold supply is carrying extremely hot water because the hoses are swapped. Reconnect cold to the cold inlet and hot to the hot inlet. Samsung says service is not needed for it.
Who handles it
Check, then book
Related codes
Source
Samsung washing machine information and error codes

What Samsung washer 14C2 means.

What it means

14C2 is Samsung's hot/cold error on a washer: the cold supply is carrying extremely hot water because the hoses are swapped. Reconnect cold to the cold inlet and hot to the hot inlet. Samsung says service is not needed for it.

What you can safely check

Before you look behind a panel, pull the plug and shut both water taps, and mop up any puddle you find.

When to call a technician

The hoses sit on the right inlets and 14C2 still comes back.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung washer 14C2: Gloved hand holding a washer's drain pump filter with lint beside the open lower access door, with a shallow tray of water on a towel
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with 14C2 one character at a time: Samsung writes it with the digit 1, the digit 4, a capital C and the digit 2.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Match the colors

    Typically blue goes to blue and red to red, so the cold supply reaches the cold inlet and the hot supply the hot inlet.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Check at the taps

    Make sure the hose from the cold tap is the one on the cold inlet; in some homes the taps are not labeled.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Run a short cycle

    Open both taps fully and run a cycle to confirm the code no longer returns.

Still showing 14C2?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

Fill and the water level.

Conceptual Washer sectionInlet valveTubLevel sensorDrain pump1234
  1. 2Tub

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Parts behind the message.

Two braided steel hoses run from wall shutoff valves to the back of a washer, with red and blue bands on the hoses

Component reference

Washer supply hoses

Samsung's washer pages name the supply hoses for the not-filling codes, the water-level or leakage group and the hot/cold error.

Read the definition

A little more context.

What is a Samsung washer reporting with 14C2?

For 14C2, Samsung says water from the cold supply is extremely hot, which happens when cold is connected to hot and hot to cold. Swapping the hoses back fixes it.

Read the supporting manual

What should I check before I book a visit?

With 14C2 showing, shut the taps, then match the hoses to the inlets. Samsung says this typically means blue to blue and red to red. Open the taps and run a cycle.

Read the supporting manual

Can the washer stay in use while this shows?

Safety with 14C2: This code is a connection mix-up, not a failing part, so the washer is fine to use once the hoses are right. Let hot water cool before you handle the fittings.

Read the supporting manual

How is 14C2 different from the codes near it?

1 4C (Not filling error) differs from 14C2 by a single character, and Samsung lists it as a separate entry for this washer. 18C2 (Mems Sensor Error) differs from 14C2 by a single character, and Samsung lists it as a separate entry for this washer.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung washing machine information and error codes

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article

Scope: Samsung washers, all models unless the article notes otherwise. Source: Samsung washing machine information and error codes (Samsung US support article TSG10000997), checked November 2026. The entry used for 14C2 is printed as: "4C2, 4E2, CE, 14C2, nF1: Hot/cold error" (TSG10000997, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung washer reporting with 14C2?

Samsung says water from the cold supply is extremely hot, which happens when cold is connected to hot and hot to cold. Swapping the hoses back fixes it.

Does this code mean the washer needs repair?

No. Samsung states this code does not indicate that service is needed; it comes from swapped supply hoses.

How can I tell which tap is the hot one?

Samsung only says to match cold to cold and hot to hot, typically blue and red. If the taps are unlabeled, run the tap alone and feel the water temperature.

Is 14C2 the same as 4C2?

14C2 is 4C2 with a leading 1. Samsung lists the two together under Hot/cold error and does not say what the 1 changes, so read them as one meaning.

Do I need a visit for 14C2?

Samsung says this code does not call for service. Book a visit with us only if the hoses are right and the code still appears.

Which other strings does Samsung print with it?

Samsung's line for Hot/cold error prints 5 strings in this order: 4C2, 4E2, CE, 14C2, nF1. 14C2 is number 4 of them.

Let’s take care of it.

Smart appliances still
need a steady hand.