Samsung washer 1 0C / Water and drain

Samsung washer
error 1 0C

Washer / display reference1 0C

1 0C is Samsung's overflow error on a washer: there is too much water in the tub. Samsung sends you to the same drain guide as for no-drain codes. Check the drain hose and level, and book a technician with us if it continues.

Also shown as 1 0C

Last reviewed

Washer / display reference1 0C
Meaning
1 0C is Samsung's overflow error on a washer: there is too much water in the tub. Samsung sends you to the same drain guide as for no-drain codes. Check the drain hose and level, and book a technician with us if it continues.
Who handles it
Check, then book
Related codes
Source
Samsung washing machine information and error codes

What Samsung washer 1 0C means.

What it means

1 0C is Samsung's overflow error on a washer: there is too much water in the tub. Samsung sends you to the same drain guide as for no-drain codes. Check the drain hose and level, and book a technician with us if it continues.

What you can safely check

Before you look behind a panel, pull the plug and shut both water taps, and mop up any puddle you find.

When to call a technician

The water level stays too high after the drain checks.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung washer 1 0C: Gloved hand holding a washer's drain pump filter with lint beside the open lower access door, with a shallow tray of water on a towel
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with 1 0C one character at a time: Samsung writes it with the digit 1, a space, the digit 0 and a capital C.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Stop the cycle

    Turn the washer off and unplug it if water is standing in the tub or the door area.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Check the drain path

    The drain hose should be unkinked and 6 to 8 inches into the pipe; the pump filter on a front loader should be clear.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Check the taps

    Make sure both water taps are not leaking by into the washer while it is off.

Still showing 1 0C?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

Fill and the water level.

Conceptual Washer sectionInlet valveTubLevel sensorDrain pump1234
  1. 2Tub

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Parts behind the message.

Gray corrugated drain hose curved into a white standpipe with a hand holding a yellow tape measure against the hose

Component reference

Washer drain hose

The drain hose is the part Samsung's drain guide checks first for the no-drain and overflow codes.

Read the definition
Open service door on the lower front of a washer showing the round filter cap, with a folded gray towel on the floor beneath

Component reference

Washer pump filter

The pump filter is the front loader step in Samsung's drain guide, used for the no-drain codes and for overflow.

Read the definition

A little more context.

What is a Samsung washer reporting with 1 0C?

For 1 0C, Samsung says there is too much water in the washer and refers to the same guide it uses for water that will not drain.

Read the supporting manual

What should I check before I book a visit?

With 1 0C showing, do not start another cycle on top of standing water. Check the drain hose, the level of the washer and, on a front loader, the pump filter.

Read the supporting manual

Can the washer stay in use while this shows?

Safety with 1 0C: Too much water can reach electrical parts and can flood the floor. Unplug the washer, shut the taps and remove water before you inspect anything.

Read the supporting manual

How is 1 0C different from the codes near it?

1 1C (Water level or leakage error) differs from 1 0C by a single character, and Samsung lists it as a separate entry for this washer. 1 3C (Motor Error) differs from 1 0C by a single character, and Samsung lists it as a separate entry for this washer.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung washing machine information and error codes

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article

Manufacturer document

Samsung washing machine will not drain

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-05-05; no printed revision / article

Scope: Samsung washers, all models unless the article notes otherwise. Source: Samsung washing machine information and error codes; Samsung washing machine will not drain (Samsung US support article TSG10000997, TSG10007110), checked November 2026. The entry used for 1 0C is printed as: "OE, 0E, OC, 0C, 1 OC, 1 0C: Overflow error" (TSG10000997, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung washer reporting with 1 0C?

Samsung says there is too much water in the washer and refers to the same guide it uses for water that will not drain.

Is an overflow code the same as a leak code?

No. Samsung groups overflow separately from the water level or leakage codes: one means too much water in the tub, the other moisture where it does not belong.

Why does Samsung link overflow and no-drain?

Both use the same drain guide, because water that cannot leave the tub is the usual way the level climbs.

Is 1 0C the same as 0C?

1 0C is 0C with a leading 1. Samsung lists the two together under Overflow error and does not say what the 1 changes, so read them as one meaning.

Do I need a visit for 1 0C?

If the drain path is clear and the washer still reports too much water, book a visit with us before running it again.

Which other strings does Samsung print with it?

Samsung's line for Overflow error prints 6 strings in this order: OE, 0E, OC, 0C, 1 OC, 1 0C. 1 0C is number 6 of them.

Let’s take care of it.

Smart appliances still
need a steady hand.