Inside the appliance
Cooktop IGBT sensor. In plain English.
C2 on a Samsung NZ30K7880U* or NZ30A3060UK induction cooktop reports that the IGBT sensor is open, or shorted, while a burner is operating. The manual prints the meaning and no steps. Book a technician with us if C2 returns.

Where it fits.
Cooktop IGBT sensor in the appliance
The manual does not give its position.
The picture shows a typical example of this component. It does not tell you which replacement fits your model.
What shifts once this system needs attention.
Cooktop IGBT sensor problems can arrive with weaker performance or a code that keeps coming back. A component is tested before anyone decides it is to blame.

Samsung electric cooktop slow to boil or cycling on and off
A Samsung electric cooktop unit that switches on and off is behaving normally, even on high, and does so more with an undersized pan or one with a curved base. A unit that will not hold a rolling boil usually points to the pan or low voltage. Use flat pans that match the unit and cover them with a lid.

Samsung electric cooktop surface unit will not turn on
When a surface unit on a Samsung electric cooktop stays off, the manual blames a blown fuse, a tripped breaker, or a control meant for a different unit. Reset the breaker, then check that you are using the correct control for the unit you want.
Owner care, within the model instructions.
Switch the appliance off and unplug it before any check of your own. Look out for pooled water and jagged debris. Never touch a wet plug or an electrical area, take off a service panel or go past what your model's owner instructions allow.
- 1
Turn the cooktop off
Switch off the cooktop and let it cool.
- 2
Write down the display
Note exactly what the display shows, plus the number on the model plate.
- 3
Read the manual
The cooktop manual's Information codes table prints the meaning only.
Cleaning or replacement?
Leave internal testing to a technician.
C2 shows when a burner runs.
C2 returns after you turn the cooktop off and on.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Cooktop IGBT sensor advice. Choose the manual that fits your model.
- Electric Cooktop User manual NZ30K7880U*
- Electric Cooktop User manual NZ30A3060UK
Follow the user manual for your exact model. See how we research these pages.
What is an IGBT sensor?
Samsung's manual does not explain the term. It prints the name and says the sensor is open or shorted while the burner operates.
Which models print C2?
The NZ30K7880U* and NZ30A3060UK induction cooktop manuals, in the Information codes table.
Is C0 related?
C0 is a top sensor open or shorted entry; it is separate from the IGBT sensor.
When do I book?
When C2 shows. We start from the code and model number.
Samsung codes, symptoms, parts, house calls
From the message to what comes next.
C2
C2 on a Samsung induction cooktop means the IGBT sensor is open or shorted while the burner is operating. Turn the cooktop off and restart.
Samsung electric cooktop slow to boil or cycling on and off
A Samsung electric cooktop unit that switches on and off is behaving normally, even on high, and does so more with an undersized pan or one with a curved base. A unit that will not hold a rolling boil usually points to the pan or low voltage. Use flat pans that match the unit and cover them with a lid.
Cooktop repair
Book a diagnostic for your exact model, carried out beside the appliance.
Find your metro
Office details, and the access notes to send us.

