Inside the appliance
Washer pump filter. In plain English.
The pump filter is the front loader step in Samsung's drain guide, used for the no-drain codes and for overflow. Top loaders have no removable pump filter. Samsung says a clogged debris filter reduces the effectiveness of the draining system.

Where it fits.
Washer pump filter in the appliance
Samsung's drain guide does not give its position; it only says front loaders have a removable pump filter.
The picture shows a typical example of this component. It does not tell you which replacement fits your model.
What shifts once this system needs attention.
Washer pump filter problems can arrive with weaker performance or a code that keeps coming back. A component is tested before anyone decides it is to blame.
Owner care, within the model instructions.
Switch the appliance off and unplug it before any check of your own. Look out for pooled water and jagged debris. Never touch a wet plug or an electrical area, take off a service panel or go past what your model's owner instructions allow.
- 1
Confirm it is a front loader
Samsung says the filter step applies to front loaders only, because top loaders do not have a removable pump filter.
- 2
Clean it on a schedule
Samsung suggests cleaning the pump filter periodically to improve cleaning performance and help prevent odors.
- 3
Test a cycle
Turn the washer back on and start a cycle. It should drain at the start; if it does not, book a technician.
Cleaning or replacement?
Leave internal testing to a technician.
The washer does not drain at the start of the test cycle after the filter and hose checks.
Water leaks from the filter opening after you refit it.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Washer pump filter advice. Choose the manual that fits your model.
- Samsung washing machine will not drain
- Samsung washing machine information and error codes
Follow the user manual for your exact model. See how we research these pages.
Do top loaders have a pump filter?
Samsung says top loaders do not have a removable pump filter, so that step is skipped for them.
Which codes send me to the filter?
The no-drain codes nd, 5E, SE, 5C, SC and 1 5C, and the overflow codes OE, 0E, OC, 0C, 1 OC and 1 0C.
Is it safe to open?
Water can sit behind it. Unplug the washer, shut the taps and put towels down first.
What if cleaning does not help?
Run a cycle. If the washer still does not drain at the start, book a technician with us.
Samsung codes, symptoms, parts, house calls
From the message to what comes next.
nd
nd is Samsung's no-drain error on a washer: water is not draining at the right speed, or at all. Samsung points to its drain guide: level washer, drain hose 6 to 8 inches into the pipe and not kinked, pump filter on front loaders.
Samsung washer leaking
Samsung says most washer leaks come from conditions you can correct: a damaged hose or o-ring, debris under the door gasket, a drain hose set too deep or too shallow, a dirty pump filter, too much detergent, or a washer that rests off level. Water dripping from the door after you open it is normal. A leak with the door closed is not.
Washer repair
Book a diagnostic for your exact model, carried out beside the appliance.
Find your metro
Office details, and the access notes to send us.

