Read the whole display
Give the exact string, dashes included, and the model number on the label.
Model-specific code library
We decode 14 oven codes and messages, each with its own anchored row.
C-20 on a Samsung built-in wall oven means the oven sensor is open or shorted while the oven operates. Press OFF, restart, and if it persists disconnect power to the oven for at least 30 seconds.
Read the C-20 checks14 researched oven codes. A Samsung code can mean different things on different models, so trust the booklet for yours.
C-20 on a Samsung built-in wall oven means the oven sensor is open or shorted while the oven operates. Press OFF, restart, and if it persists disconnect power to the oven for at least 30 seconds.
Technician visitC-21 on a Samsung built-in wall oven means the internal temperature rises abnormally high. Let the oven cool, press OFF and restart; disconnect power for at least 30 seconds if it persists.
Technician visitC-23 on a Samsung built-in wall oven means the temp probe sensor is shorted while the oven operates. Press OFF, restart, and if it persists disconnect power for at least 30 seconds. Only the wall oven manuals print this code.
Technician visitC-30 on a Samsung built-in wall oven means the PCB sensor is open or shorted while the oven operates. Press OFF, restart, disconnect power for at least 30 seconds if it persists, then call for service.
Technician visitC-31 on a Samsung built-in wall oven occurs when the PCB temperature rises abnormally high. The manuals' solution is to call for service.
Technician visitC-70 on a Samsung built-in wall oven means the steam sensor is open or shorted while the oven operates. Press OFF, restart, and disconnect power for at least 30 seconds if it persists.
Technician visitC-72 on a Samsung built-in wall oven means drain system related problems. The manuals give no steps for it, so book a visit rather than running the oven through it.
Technician visitC-A2 on a Samsung built-in wall oven means the cooling motor is operating abnormally. The manuals say to call for service.
Technician visitC-d0 on a Samsung built-in wall oven means the control key is shorted for 1 minute. Wipe the buttons clean, dry any water on or around them, then switch the oven off and try again.
Check, then bookC-d1 on a Samsung NV51K7770D wall oven occurs when the door lock is mispositioned. The newer NV7000C manual prints it as C-d5.
Technician visitC-d5 on a Samsung NV7000C wall oven occurs when the door lock is mispositioned. The older NV51K7770D manual prints the same reading as C-d1.
Technician visitC-F0 on a Samsung built-in wall oven occurs when communication between the Main and Sub PBA is interrupted. Press OFF and restart; disconnect power for at least 30 seconds if it persists.
Technician visitC-F2 on a Samsung built-in wall oven occurs when communication between the Main and Touch is interrupted. The manuals print the code with no further steps.
Technician visit-dC- on a Samsung built-in wall oven appears if the divider is inserted or removed while the oven is operating. Insert the divider properly, then restart the oven.
Check, then book
We decode 14 oven codes and messages, each with its own anchored row.
The NV7000C and NV51K7770D manuals print some codes differently; C-d1 and C-d5 name the same door lock reading. A few rows are meaning only, with no steps printed.
Give the exact string, dashes included, and the model number on the label.
Switch the breaker off before you reach behind a panel, and let the cavity cool before you put a hand inside.
If food bakes or roasts poorly in a Samsung wall oven, the manual looks first at controls set incorrectly, a rack in the wrong place or not level, and wrong cookware. An oven that runs too hot or cold may need its thermistor adjusted in Settings, Adjust Temp. Low voltage can also slow broiling.
A Samsung wall oven that stays off often has a loose plug, a fuse that has gone or a breaker that has switched off, wrong settings, excess heat or a power cut. A blank display means the fuse and breaker need checking, and buttons that will not press can be the lock function. Work through those; if the oven stays off, book a technician.
Follow the user manual for your exact model. See how we research these pages.
The NV7000C and NV51K7770D manuals print some codes differently; C-d1 and C-d5 name the same door lock reading. A few rows are meaning only, with no steps printed.
Take one clear photo of the whole oven screen and another of the model label. Note what the appliance was doing when the message came up, and do not lean on what another appliance's message means.
An old search phrase is no proof from the manufacturer. If our oven documents never explain a message, we show its name and send you toward help, without blaming any part.
Open a manufacturer document from this oven library and check that the model on its cover is the one on your label. A different model has its own user manual.