Before work starts
The cost of the repair is explained to you on site once the technician has diagnosed the appliance, before any part is ordered or fitted.
Independent appliance repair
Book a visit for a Samsung built-in electric wall oven that shows a C- code. Samsung's NV51K7770D and NV7000C manuals print C-d0, C-d1 or C-d5, C-20, C-23, C-30, C-31, C-70 and C-A2. Ranges, with the oven under a cooktop, have their own page.


If food bakes or roasts poorly in a Samsung wall oven, the manual looks first at controls set incorrectly, a rack in the wrong place or not level, and wrong cookware. An oven that runs too hot or cold may need its thermistor adjusted in Settings, Adjust Temp. Low voltage can also slow broiling.

A Samsung wall oven that stays off often has a loose plug, a fuse that has gone or a breaker that has switched off, wrong settings, excess heat or a power cut. A blank display means the fuse and breaker need checking, and buttons that will not press can be the lock function. Work through those; if the oven stays off, book a technician.
C-d1 on a Samsung NV51K7770D wall oven occurs when the door lock is mispositioned. The newer NV7000C manual prints it as C-d5.
C-d5 on a Samsung NV7000C wall oven occurs when the door lock is mispositioned. The older NV51K7770D manual prints the same reading as C-d1.
C-23 on a Samsung built-in wall oven means the temp probe sensor is shorted while the oven operates. Press OFF, restart, and if it persists disconnect power for at least 30 seconds. Only the wall oven manuals print this code.
C-A2 on a Samsung built-in wall oven means the cooling motor is operating abnormally. The manuals say to call for service.
C-20 on a Samsung built-in wall oven means the oven sensor is open or shorted while the oven operates. Press OFF, restart, and if it persists disconnect power to the oven for at least 30 seconds.
C-30 on a Samsung built-in wall oven means the PCB sensor is open or shorted while the oven operates. Press OFF, restart, disconnect power for at least 30 seconds if it persists, then call for service.
C-31 on a Samsung built-in wall oven occurs when the PCB temperature rises abnormally high. The manuals' solution is to call for service.
C-d0 on a Samsung built-in wall oven means the control key is shorted for 1 minute. Wipe the buttons clean, dry any water on or around them, then switch the oven off and try again.
Nothing is named as a part until we have tested the oven in place. You see the price and say yes before an order goes in.

Samsung's wall oven manuals print C-d1, and C-d5 in the newer NV7000C manual, as: the door lock is mispositioned. Samsung gives no home steps in those tables. Book us if the code shows or the door stays shut.

C-23 is printed in Samsung's wall oven manuals as: the temp probe sensor is shorted while the oven is operating. Press OFF, restart, and take all power away for half a minute or more if it persists. Then call for service; with us, that means a booked visit.

C-A2 in Samsung's NV51K7770D manual is printed as: the cooling motor is operating abnormally. The manual's instruction is to call for service. Book us for a visit and say that C-A2 showed.
Booking to repair, step by step.
A photo of the display helps.

Choose the appliance and type the code. A quick photo of the display is the best detail you can give.

The technician checks power, sensors and the control board, then quotes the repair before starting.

The part is fitted, the appliance is tested, and the technician shows you it working.
Samsung prints these with a hyphen. C-d1 and C-d5 are the same door lock meaning in two manuals.
For C-23 and C-30 the manual says to press OFF, restart, and cut every source of power for half a minute or longer.
For C-d0, the oven manual asks you to wipe the buttons clean and keep them dry.
The model number decides which manual table applies.
A C- code comes back once the oven has been restarted and its power cut.
C-31 or C-A2 shows.
The door will not release.
Arrange a diagnosticThe cost of the repair is explained to you on site once the technician has diagnosed the appliance, before any part is ordered or fitted.
Repairs that Samsung’s warranty covers are Samsung’s to do. The repairs we make come with our own warranty on the work.
No. Samsung's articles cover both, but a wall oven is built in. A range with the oven under the cooktop is on our range page.
The temp probe sensor is shorted while the oven is operating, printed in the two wall oven manuals.
The cooling motor is operating abnormally; the manual's line is to call for service.
What the display shows, the label model number, and whether the oven was heating at the time.
Samsung codes, symptoms, parts, house calls
C-d1 on a Samsung NV51K7770D wall oven occurs when the door lock is mispositioned. The newer NV7000C manual prints it as C-d5.
If food bakes or roasts poorly in a Samsung wall oven, the manual looks first at controls set incorrectly, a rack in the wrong place or not level, and wrong cookware. An oven that runs too hot or cold may need its thermistor adjusted in Settings, Adjust Temp. Low voltage can also slow broiling.
Samsung's wall oven manuals print C-d1, and C-d5 in the newer NV7000C manual, as: the door lock is mispositioned. Samsung gives no home steps in those tables. Book us if the code shows or the door stays shut.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.