What it means
C-23 on a Samsung built-in wall oven means the temp probe sensor is shorted while the oven operates. Press OFF, restart, and if it persists disconnect power for at least 30 seconds. Only the wall oven manuals print this code.
Samsung oven C-23 / Sensors
C-23 on a Samsung built-in wall oven means the temp probe sensor is shorted while the oven operates. Press OFF, restart, and if it persists disconnect power for at least 30 seconds. Only the wall oven manuals print this code.
Also shown as C-23
C-23 on a Samsung built-in wall oven means the temp probe sensor is shorted while the oven operates. Press OFF, restart, and if it persists disconnect power for at least 30 seconds. Only the wall oven manuals print this code.
Turn the breaker off before you go behind a panel; wiring is work for a technician.
C-23 remains once power has been cut and restored.
Your Samsung checks, remembered on this device

Compare the display with C-23 one character at a time: Samsung writes it with a capital C, a hyphen, the digit 2 and the digit 3.

Unplug the temperature probe if you use one.

Restart the oven without the probe.

At least 30 seconds if it persists.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visitThis is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Component reference
C-23 is printed in Samsung's wall oven manuals as: the temp probe sensor is shorted while the oven is operating.
Read the definitionFor C-23, both wall oven manuals say the temp probe sensor is short when the oven is operating. No range manual we hold prints this code.
Read the supporting manualWith C-23 showing, unplug the temperature probe from its jack if one is fitted, press OFF and restart the oven. If it persists, disconnect all power for at least 30 seconds.
Read the supporting manualSafety with C-23: Switch the oven off at its breaker before disconnecting power, and let the cavity cool first.
Read the supporting manualC-20 (oven sensor) differs from C-23 by a single character, and Samsung lists it as a separate entry for this wall oven. C-21 (oven temperature high) differs from C-23 by a single character, and Samsung lists it as a separate entry for this wall oven.
Read the supporting manualManufacturer document
Samsung Electronics America (official manual PDF, downloadcenter.samsung.com)
DG68-00856A-03, printed footer 2018-08-29; PDF modified 17.04.2019; carries Warranty (U.S.A) on the same page as the code table (p59) / PDF p59
Manufacturer document
Samsung Electronics America (official manual PDF, downloadcenter.samsung.com)
Samsung user manual PDF created 15.01.2026 (no printed revision code on the cover) / PDF p65
Scope: NV51**700D** built-in electric wall ovens (NV7000C series); NV51K7770D* built-in electric wall ovens. Source: Built-In Electric Wall Oven User manual NV51K7770D*; Built-In Electric Wall Oven User manual NV51**700D**, checked November 2026.
Both wall oven manuals say the temp probe sensor is short when the oven is operating. No range manual we hold prints this code.
No range manual we hold prints it; only the two wall oven manuals do.
Read it as a capital C, a hyphen, the digit 2 and the digit 3. Samsung's wall oven list has no other row with these characters.
The manuals say to call for service if the power reset does not solve it. Book a visit with us.
Samsung codes, symptoms, parts, house calls
C-d0 on a Samsung built-in wall oven means the control key is shorted for 1 minute. Wipe the buttons clean, dry any water on or around them, then switch the oven off and try again.
If food bakes or roasts poorly in a Samsung wall oven, the manual looks first at controls set incorrectly, a rack in the wrong place or not level, and wrong cookware. An oven that runs too hot or cold may need its thermistor adjusted in Settings, Adjust Temp. Low voltage can also slow broiling.
C-23 is printed in Samsung's wall oven manuals as: the temp probe sensor is shorted while the oven is operating. Press OFF, restart, and take all power away for half a minute or more if it persists. Then call for service; with us, that means a booked visit.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.