Inside the appliance
Oven temp probe sensor. In plain English.
C-23 is printed in Samsung's wall oven manuals as: the temp probe sensor is shorted while the oven is operating. Press OFF, restart, and take all power away for half a minute or more if it persists. Then call for service; with us, that means a booked visit.

Where it fits.
Oven temp probe sensor in the appliance
The manuals do not describe its position.
The picture shows a typical example of this component. It does not tell you which replacement fits your model.
What shifts once this system needs attention.
Oven temp probe sensor problems can arrive with weaker performance or a code that keeps coming back. A component is tested before anyone decides it is to blame.

Samsung wall oven bakes unevenly or runs too hot or cold
If food bakes or roasts poorly in a Samsung wall oven, the manual looks first at controls set incorrectly, a rack in the wrong place or not level, and wrong cookware. An oven that runs too hot or cold may need its thermistor adjusted in Settings, Adjust Temp. Low voltage can also slow broiling.

Samsung wall oven will not turn on
A Samsung wall oven that stays off often has a loose plug, a fuse that has gone or a breaker that has switched off, wrong settings, excess heat or a power cut. A blank display means the fuse and breaker need checking, and buttons that will not press can be the lock function. Work through those; if the oven stays off, book a technician.
Owner care, within the model instructions.
Switch the appliance off and unplug it before any check of your own. Look out for pooled water and jagged debris. Never touch a wet plug or an electrical area, take off a service panel or go past what your model's owner instructions allow.
- 1
Press OFF and restart
The manual says to press OFF, then restart the oven.
- 2
Cut the power
If C-23 persists, cut all power to the unit for 30 seconds or longer, then reconnect.
- 3
Note the model
The NV51K7770D and NV7000C manuals both print C-23. Write down your model number.
Cleaning or replacement?
Leave internal testing to a technician.
C-23 is still there after a restart and a power cut.
The oven stops heating mid-cook with C-23 showing.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Oven temp probe sensor advice. Choose the manual that fits your model.
- Built-In Electric Wall Oven User manual NV51K7770D*
- Built-In Electric Wall Oven User manual NV51**700D**
Follow the user manual for your exact model. See how we research these pages.
What does C-23 mean?
The wall oven manuals word it this way: the temp probe sensor is shorted while the oven operates.
Is it on ranges too?
The cached range manual does not print C-23. It appears in the wall oven manuals.
Is C-20 the same?
No. C-20 is an open or shorted oven sensor; C-23 names the temp probe sensor.
When do I book?
If C-23 returns after the restart and power disconnect.
Samsung codes, symptoms, parts, house calls
From the message to what comes next.
C-23
C-23 on a Samsung built-in wall oven means the temp probe sensor is shorted while the oven operates. Press OFF, restart, and if it persists disconnect power for at least 30 seconds. Only the wall oven manuals print this code.
Samsung wall oven bakes unevenly or runs too hot or cold
If food bakes or roasts poorly in a Samsung wall oven, the manual looks first at controls set incorrectly, a rack in the wrong place or not level, and wrong cookware. An oven that runs too hot or cold may need its thermistor adjusted in Settings, Adjust Temp. Low voltage can also slow broiling.
Oven repair
Book a diagnostic for your exact model, carried out beside the appliance.
Find your metro
Office details, and the access notes to send us.

