Inside the appliance
Washer motor. In plain English.
Samsung lists a Motor Error under its washer "All other errors": 3C, E3 and 1 3C, and on some models 3E. The entry has a name and no steps. Power the washer off for 2 to 3 minutes and restart; if it continues, book a technician.

Where it fits.
Washer motor in the appliance
Samsung's article does not give its position. It drives the drum.
The picture shows a typical example of this component. It does not tell you which replacement fits your model.
What shifts once this system needs attention.
Washer motor problems can arrive with weaker performance or a code that keeps coming back. A component is tested before anyone decides it is to blame.

Samsung washer leaking
Samsung says most washer leaks come from conditions you can correct: a damaged hose or o-ring, debris under the door gasket, a drain hose set too deep or too shallow, a dirty pump filter, too much detergent, or a washer that rests off level. Water dripping from the door after you open it is normal. A leak with the door closed is not.

Samsung washer not spinning
No spin at all comes from either a drain problem or a motor problem. Samsung says the washer tries to drain before it spins, so a clogged pump filter or a badly set drain hose can stop the spin before it starts. After clearing the drain side, Samsung suggests Calibration mode. If the tub still does not turn, the washer needs service.
Owner care, within the model instructions.
Switch the appliance off and unplug it before any check of your own. Look out for pooled water and jagged debris. Never touch a wet plug or an electrical area, take off a service panel or go past what your model's owner instructions allow.
- 1
Power it off
Samsung's only step is to power the washer off for 2 to 3 minutes, power it on and restart the cycle.
- 2
Check which 3E you have
On some models 3E is a Voltage Error and on others a Motor Error. Your user manual says which.
- 3
Keep the details
Write down the code and your model. Samsung gives no further steps, so these are what a visit starts from.
Cleaning or replacement?
Leave internal testing to a technician.
The code continues after the power-off and restart.
The code returns on every cycle.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Washer motor advice. Choose the manual that fits your model.
- Samsung washing machine information and error codes
Follow the user manual for your exact model. See how we research these pages.
Which codes are the Motor Error?
3C, E3 and 1 3C. On some models 3E is a Motor Error as well.
Is bE the same?
No. Samsung lists bE and 6E as a Motor Speed Sensor Error, a separate entry.
What does Samsung say to do?
Power the washer off for 2 to 3 minutes, power on and restart the cycle. If it continues, request service.
Can I test the motor myself?
Samsung gives no home test. Book a technician with us and we will start from the code and the model.
Samsung codes, symptoms, parts, house calls
From the message to what comes next.
3C
3C appears on Samsung's list of other washer errors as a Motor Error. Samsung gives the name only, with no specific steps. Power the washer off for 2 to 3 minutes, power it on and restart. Book a technician with us if it continues.
Samsung washer leaking
Samsung says most washer leaks come from conditions you can correct: a damaged hose or o-ring, debris under the door gasket, a drain hose set too deep or too shallow, a dirty pump filter, too much detergent, or a washer that rests off level. Water dripping from the door after you open it is normal. A leak with the door closed is not.
Washer repair
Book a diagnostic for your exact model, carried out beside the appliance.
Find your metro
Office details, and the access notes to send us.

