Samsung washer 6E / Motor and drive

Samsung washer
error 6E

Washer / display reference

6E appears on Samsung's list of other washer errors as a Motor Speed Sensor Error. Samsung gives the name only, with no specific steps. Power the washer off for 2 to 3 minutes, power it on and restart. Book a technician with us if it continues.

Also shown as 6E

Last reviewed

Washer / display reference
Meaning
6E appears on Samsung's list of other washer errors as a Motor Speed Sensor Error. Samsung gives the name only, with no specific steps. Power the washer off for 2 to 3 minutes, power it on and restart. Book a technician with us if it continues.
Who handles it
Reset, then book
Related codes
Source
Samsung washing machine information and error codes

What Samsung washer 6E means.

What it means

6E appears on Samsung's list of other washer errors as a Motor Speed Sensor Error. Samsung gives the name only, with no specific steps. Power the washer off for 2 to 3 minutes, power it on and restart. Book a technician with us if it continues.

What you can safely check

Before you look behind a panel, pull the plug and shut both water taps, and mop up any puddle you find.

When to call a technician

6E returns after the power-off and restart.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung washer 6E: Rear of a front-load washer with the back panel off, showing the drive motor, belt and large spoked pulley, with the power cord unplugged on the floor
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with 6E one character at a time: Samsung writes it with the digit 6 and a capital E.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Power off for 2 to 3 minutes

    Turn the washer off and leave it for 2 to 3 minutes.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Power on and restart

    Turn it back on and restart the cycle.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Note when it appears

    Write down whether the drum was spinning up or idle.

Still showing 6E?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The drum drive.

Conceptual Washer sectionDrumMotorDriveControl1234
  1. 1Drum
  2. 3Drive
  3. 4Control

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Parts behind the message.

Technician's hands holding a flashlight at the open rear of a washer showing the drum housing, belt, pulley and motor

Component reference

Washer motor

Samsung lists a Motor Error under its washer "All other errors": 3C, E3 and 1 3C, and on some models 3E.

Read the definition

A little more context.

What is a Samsung washer reporting with 6E?

For 6E, Samsung lists it in "All other errors" as a Motor Speed Sensor Error, and gives no specific steps for it, only the basic power-cycle steps.

Read the supporting manual

What should I check before I book a visit?

With 6E showing, power the washer off for 2 to 3 minutes, power it back on and restart the cycle. If the code comes back, note what the washer was doing when it appeared.

Read the supporting manual

Can the washer stay in use while this shows?

Treat a repeating motor speed sensor error as a service matter. Unplug the washer before you open any panel, and do not bypass any part.

Read the supporting manual

How is 6E different from the codes near it?

bE differs from 6E only by a look-alike character, 6 against b. Samsung lists both under Motor Speed Sensor Error, so they carry the same meaning.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung washing machine information and error codes

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article

Scope: Samsung washers, all models unless the article notes otherwise. Source: Samsung washing machine information and error codes (Samsung US support article TSG10000997), checked November 2026. The entry used for 6E is printed as: "bE, 6E - Motor Speed Sensor Error" (TSG10000997, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung washer reporting with 6E?

Samsung lists it in "All other errors" as a Motor Speed Sensor Error, and gives no specific steps for it, only the basic power-cycle steps.

Does Samsung give specific steps for this code?

No. It is in the "All other errors" part of the list, where the basic power-off, power-on and restart steps apply.

Is 6E the same as bE?

bE differs from 6E only by a look-alike character, 6 against b. Samsung lists both under Motor Speed Sensor Error, so they carry the same meaning.

Do I need a visit for 6E?

Samsung says to request service if the error continues after the basic steps. Book a visit with us at that point.

Which other strings does Samsung print with it?

Samsung's line for Motor Speed Sensor Error prints 2 strings in this order: bE, 6E. 6E is number 2 of them.

Let’s take care of it.

Smart appliances still
need a steady hand.