Samsung range -dC- / Door and lid

Samsung range
error -dC-

Range / display reference-dC-

-dC- on a Samsung range means the Twin Mode partition is not installed properly, or cooking began before it was inserted. Reinsert it fully: third position from the top on electric and dual fuel models, fourth on gas.

Also shown as -dC-

Last reviewed

Range / display reference-dC-
Meaning
-dC- on a Samsung range means the Twin Mode partition is not installed properly, or cooking began before it was inserted. Reinsert it fully: third position from the top on electric and dual fuel models, fourth on gas.
Who handles it
Check, then book
Source
Samsung range or wall oven error codes

What Samsung range -dC- means.

What it means

-dC- on a Samsung range means the Twin Mode partition is not installed properly, or cooking began before it was inserted. Reinsert it fully: third position from the top on electric and dual fuel models, fourth on gas.

What you can safely check

Turn the breaker off before you go behind a panel; wiring and gas lines are work for a technician.

When to call a technician

-dC- stays on with the partition seated.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung range -dC-: Open freestanding gas range oven showing a metal divider that splits the cavity into two compartments, each with a rack, and a door lock hook at the top.
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with -dC- one character at a time: Samsung writes it with a hyphen, a lowercase d, a capital C and a hyphen.

  2. Ranges in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Reseat the partition

    Slide it in completely, with each side in the right rack position for your fuel type.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Check the rack position

    Third from the top on electric and dual fuel, fourth on gas.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Check the back switch

    If the partition is not in the oven, make sure nothing is pressing the partition switch at the back.

Still showing -dC-?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The door lock.

Conceptual Range / oven sectionDoorLock motor / latchControl123
  1. 1Door
  2. 3Control

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Parts behind the message.

A hand slides a flat metal divider onto the side rack supports inside an oven cavity.

Component reference

Range Twin Mode partition

A Samsung Twin Mode range divides its oven cavity with a partition.

Read the definition

A little more context.

What is a Samsung range reporting with -dC-?

For -dC-, Samsung says the Twin Mode partition is not installed properly. The code also shows if cooking started before the partition was inserted.

Read the supporting manual

What should I check before I book a visit?

With -dC- showing, take the partition out and reinsert it fully. Each side goes in the third position from the top on electric and dual fuel models, and the fourth on gas models.

Read the supporting manual

Can the range stay in use while this shows?

Safety with -dC-: Let the oven cool before you reach in, and use oven mitts for the racks and the partition.

Read the supporting manual

How is -dC- different from the codes near it?

The same characters also appear on a wall oven, where Samsung ties it to divider. Check which appliance you are standing in front of.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung range or wall oven error codes

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-05-05; no printed revision / article

Scope: Samsung ranges, all models unless the article notes otherwise. Source: Samsung range or wall oven error codes (Samsung US support article TSG10003529), checked November 2026.

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung range reporting with -dC-?

Samsung says the Twin Mode partition is not installed properly. The code also shows if cooking started before the partition was inserted.

Why does it show when I did not remove the partition?

Samsung says the code also appears if cooking began before the partition was inserted, so start only after it is seated.

Does -dC- mean the same on a wall oven?

The same characters also appear on a wall oven, where Samsung ties it to divider. Check which appliance you are standing in front of.

Do I need a visit for -dC-?

Book a visit with us if the partition is seated correctly, nothing presses the switch and the code stays.

Let’s take care of it.

Smart appliances still
need a steady hand.