Inside the appliance
Range door lock. In plain English.
C-d1 on a Samsung electric range is printed as: the door lock is misaligned. The manual says to press OFF/CLEAR and restart, then remove all power for half a minute or more if it persists. If that does not solve it, book a technician.

Where it fits.
Range door lock in the appliance
The manual does not describe its position beyond the door.
The picture shows a typical example of this component. It does not tell you which replacement fits your model.
What shifts once this system needs attention.
Range door lock problems can arrive with weaker performance or a code that keeps coming back. A component is tested before anyone decides it is to blame.

Samsung gas range burners will not light
For burners that will not light, the Samsung gas range manual lists the plug and fuse or breaker, the gas supply, the control knob not pressed in to the Lite position, burner caps off or the base misaligned, and dirty electrodes. Check those. If you smell gas, turn the knob off, clear the room and call your gas supplier.

Samsung range oven will not turn on
The usual reasons a Samsung range oven stays off are a plug not fully in, a fuse that has gone or a breaker that has switched off, wrong settings, or a power cut. On gas models the oven door lock or Sabbath mode can also stop it. Work through those; if the oven stays off, book a technician.
Owner care, within the model instructions.
Switch the appliance off and unplug it before any check of your own. Look out for pooled water and jagged debris. Never touch a wet plug or an electrical area, take off a service panel or go past what your model's owner instructions allow.
- 1
Press OFF/CLEAR
The NE63*671*S* manual says to press OFF/CLEAR and restart the range.
- 2
Cut the power
If C-d1 persists, take all power off the range for half a minute or more, then reconnect.
- 3
Stay clear of the latch
Do not force the door or the lock. Write down the code and model number for the visit.
Cleaning or replacement?
Leave internal testing to a technician.
C-d1 stays after the OFF/CLEAR restart and the half-minute without power.
The door sticks shut or will not unlock.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Range door lock advice. Choose the manual that fits your model.
- Electric Range User manual NE63*671*S*
Follow the user manual for your exact model. See how we research these pages.
What does C-d1 mean on a range?
The NE63*671*S* manual prints it as: the door lock is misaligned.
Is the oven door lock the same code?
Wall ovens print it too, as C-d1 or C-d5. Those are on our wall oven page.
Does Samsung say how to fix it?
Restart with OFF/CLEAR, remove power for half a minute or more, then call for service if it remains.
Is it safe to cut power?
Use the breaker if you are unsure about the plug. Book a technician rather than opening the unit yourself.
Samsung codes, symptoms, parts, house calls
From the message to what comes next.
Samsung range C-d1 error code
C-d1 on a Samsung range means the door lock is misaligned, per the NE63A6711 manual. Press OFF/CLEAR and restart; if it persists, disconnect power to the range for at least 30 seconds.
Samsung gas range burners will not light
For burners that will not light, the Samsung gas range manual lists the plug and fuse or breaker, the gas supply, the control knob not pressed in to the Lite position, burner caps off or the base misaligned, and dirty electrodes. Check those. If you smell gas, turn the knob off, clear the room and call your gas supplier.
Range repair
Book a diagnostic for your exact model, carried out beside the appliance.
Find your metro
Office details, and the access notes to send us.

