Samsung range C-F2 / Control board

Samsung range
error C-F2

Range / display referenceC-F2

C-F2 on a Samsung range, per the NE63A6711 manual, means communication between the Main and Touch is interrupted. Restart the oven; if the problem persists, disconnect power for at least 30 seconds.

Also shown as C-F2

Last reviewed

Range / display referenceC-F2
Meaning
C-F2 on a Samsung range, per the NE63A6711 manual, means communication between the Main and Touch is interrupted. Restart the oven; if the problem persists, disconnect power for at least 30 seconds.
Who handles it
Technician visit
Source
Electric Range User manual NE63*671*S*

What Samsung range C-F2 means.

What it means

C-F2 on a Samsung range, per the NE63A6711 manual, means communication between the Main and Touch is interrupted. Restart the oven; if the problem persists, disconnect power for at least 30 seconds.

What you can safely check

Turn the breaker off before you go behind a panel; wiring and gas lines are work for a technician.

When to call a technician

C-F2 comes back once the power has been cut and restored.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung range C-F2: Ranges in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with C-F2 one character at a time: Samsung writes it with a capital C, a hyphen, a capital F and the digit 2.

  2. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 2

    Restart the oven

    Press OFF/CLEAR first.

  3. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Disconnect power

    At least 30 seconds, then reconnect.

  4. A technician testing a control board with a meter
    Illustration. Follow your model’s instructions.
    Check 4

    Test the touch controls

    See whether the keys respond.

Still showing C-F2?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 1Keypad / touch panel
  2. 3Element wiring

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

A little more context.

What is a Samsung range reporting with C-F2?

For C-F2, the NE63A6711 range manual says communication between the Main and Touch is interrupted.

Read the supporting manual

What should I check before I book a visit?

With C-F2 showing, restart the oven, and if it persists disconnect all power to the range for at least 30 seconds and reconnect.

Read the supporting manual

Can the range stay in use while this shows?

Safety with C-F2: Switch off at the breaker before you disconnect or reconnect power.

Read the supporting manual

How is C-F2 different from the codes near it?

C-F0 (main-to-sub communication) differs from C-F2 by a single character, and Samsung lists it as a separate entry for this range. The same characters also appear on a wall oven, where Samsung ties it to main-to-touch communication. Check which appliance you are standing in front of.

Read the supporting manual

The manual behind the message.

Manufacturer document

Electric Range User manual NE63*671*S*

Samsung Electronics America (official manual PDF, downloadcenter.samsung.com)

Samsung user manual PDF created 14.02.2025 (no printed revision code on the cover); has a Warranty (U.S.A.) section with Samsung Electronics America, Inc., Ridgefield Park, NJ / PDF p57

Scope: NE63*671*S* electric slide-in ranges (NE63A6711SS/AC listed on the download page). Source: Electric Range User manual NE63*671*S*, checked November 2026. The entry used for C-F2 is printed as: "Main and Touch is interrupted." (O_01._IB_FULL_NE5000A_NE63A6711_EN, page 57).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung range reporting with C-F2?

The NE63A6711 range manual says communication between the Main and Touch is interrupted.

Which two parts are not communicating?

The manual names the Main and the Touch.

Does C-F2 mean the same on a wall oven?

The same characters also appear on a wall oven, where Samsung ties it to main-to-touch communication. Check which appliance you are standing in front of.

Do I need a visit for C-F2?

The manual says to call for service if the power reset does not solve it. Book a visit with us.

Let’s take care of it.

Smart appliances still
need a steady hand.