What it means
C-31 on a Samsung range, per the NE63A6711 manual, occurs when the PCB temperature rises abnormally high. The listed solution is to call for service.
Samsung range C-31 / Heating
C-31 on a Samsung range, per the NE63A6711 manual, occurs when the PCB temperature rises abnormally high. The listed solution is to call for service.
Also shown as C-31
C-31 on a Samsung range, per the NE63A6711 manual, occurs when the PCB temperature rises abnormally high. The listed solution is to call for service.
Turn the breaker off before you go behind a panel; wiring and gas lines are work for a technician.
C-31 shows.
Your Samsung checks, remembered on this device

Compare the display with C-31 one character at a time: Samsung writes it with a capital C, a hyphen, the digit 3 and the digit 1.

Do not keep cooking.

Wait until the range is cool.

The manual lists service only.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visitThis is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Component reference
C-30 on Samsung's NE63*671*S* electric range is printed as: the main PCB sensor is open, or shorted, while the oven is operating.
Read the definitionFor C-31, the NE63A6711 range manual says the code occurs if the PCB temperature rises abnormally high, and gives one solution: call for service.
Read the supporting manualWith C-31 showing, turn the range off, let it cool and keep the oven idle. The manual gives no reset for this one.
Read the supporting manualSafety with C-31: Leave the oven switched off until a technician has looked.
Read the supporting manualC-21 (oven temperature high) differs from C-31 by a single character, and Samsung lists it as a separate entry for this range. C-30 (main PCB sensor) differs from C-31 by a single character, and Samsung lists it as a separate entry for this range.
Read the supporting manualManufacturer document
Samsung Electronics America (official manual PDF, downloadcenter.samsung.com)
Samsung user manual PDF created 14.02.2025 (no printed revision code on the cover); has a Warranty (U.S.A.) section with Samsung Electronics America, Inc., Ridgefield Park, NJ / PDF p57
Scope: NE63*671*S* electric slide-in ranges (NE63A6711SS/AC listed on the download page). Source: Electric Range User manual NE63*671*S*, checked November 2026.
The NE63A6711 range manual says the code occurs if the PCB temperature rises abnormally high, and gives one solution: call for service.
The manual gives no reset steps for this code, only service.
On a small display the 1 in C-31 can be taken for I or l. Samsung's range list has no row spelled that way, so C-31 is the reading to look up.
Book a visit with us; the manual lists service as the solution.
Samsung codes, symptoms, parts, house calls
Cooktop in use on a Samsung range means Self Clean cannot start because a cooktop burner or element is still on. Turn every burner or element off, then start Self Clean again.
For burners that will not light, the Samsung gas range manual lists the plug and fuse or breaker, the gas supply, the control knob not pressed in to the Lite position, burner caps off or the base misaligned, and dirty electrodes. Check those. If you smell gas, turn the knob off, clear the room and call your gas supplier.
C-30 on Samsung's NE63*671*S* electric range is printed as: the main PCB sensor is open, or shorted, while the oven is operating. The manual says to press OFF/CLEAR and restart, take all power off for half a minute or more, then call for service.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.