Samsung washer Hot & Tap Cold or Hot & Cool / Blinking lights

Samsung washer
error Hot & Tap Cold or Hot & Cool

Washer / display referenceHot & Tap Cold or Hot & Cool

On a Samsung washer, blinking Hot & Tap Cold or Hot & Cool lights are read as: the washer reports a Mems sensor error. Power off for 2 to 3 minutes, power on and restart the cycle. Book a technician with us if the same lights return and the washer stops working normally.

Also shown as Hot & Tap Cold or Hot & Cool

Last reviewed

Washer / display referenceHot & Tap Cold or Hot & Cool
Meaning
On a Samsung washer, blinking Hot & Tap Cold or Hot & Cool lights are read as: the washer reports a Mems sensor error. Power off for 2 to 3 minutes, power on and restart the cycle. Book a technician with us if the same lights return and the washer stops working normally.
Who handles it
Check, then book
Source
Samsung washing machine information and error codes

What Samsung washer Hot & Tap Cold or Hot & Cool means.

What it means

On a Samsung washer, blinking Hot & Tap Cold or Hot & Cool lights are read as: the washer reports a Mems sensor error. Power off for 2 to 3 minutes, power on and restart the cycle. Book a technician with us if the same lights return and the washer stops working normally.

What you can safely check

Before you look behind a panel, pull the plug and shut both water taps, and mop up any puddle you find.

When to call a technician

The same lights blink again and the washer still does not run normally.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung washer Hot & Tap Cold or Hot & Cool: Front-load washer control panel with a row of small indicator lights, some glowing blue or white, and a round knob, above a glass door showing laundry.
    Illustration. Follow your model’s instructions.
    Before you begin

    Match the lights

    Confirm that exactly Hot & Tap Cold or Hot & Cool blink, not more and not fewer. Blinking can also be part of normal operation, so treat it as a code only if the washer is not working normally.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Power off for 2 to 3 minutes

    Turn the washer off.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Power on and restart

    Restart the cycle.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Watch the lights

    See whether the same combination returns.

Still showing Hot & Tap Cold or Hot & Cool?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The control and its sensors.

Conceptual Washer sectionControl panelControl boardLevel sensorMotor wiring1234
  1. 1Control panel
  2. 2Control board
  3. 4Motor wiring

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Parts behind the message.

Gloved hand holding a small green circuit board with a sensor chip beside an open washer control housing with wiring

Component reference

Washer Mems sensor

Samsung lists a Mems Sensor Error among its washer "All other errors": 8E, 8C, BC, BE and their numbered forms.

Read the definition

A little more context.

What do blinking Hot & Tap Cold or Hot & Cool lights mean on a Samsung washer?

Samsung reads blinking Hot & Tap Cold or Hot & Cool lights as: the washer reports a Mems sensor error.

Read the supporting manual

Are blinking lights always an error code?

No. Samsung says lights may blink as part of regular use, so it is an error only if the washer also is not working normally, for example stopping mid-cycle.

Read the supporting manual

How is this pattern different from the ones near it?

No other pattern in Samsung's washer list differs from Hot & Tap Cold or Hot & Cool by a single light, so nothing close to it carries a different reading.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung washing machine information and error codes

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article

Scope: Samsung washers, all models unless the article notes otherwise. Source: Samsung washing machine information and error codes (Samsung US support article TSG10000997), checked November 2026.

Here to help

Good questions.
Clear answers.

Talk to our team
How does Samsung read blinking Hot & Tap Cold or Hot & Cool lights on a Samsung washer?

Samsung reads them as: the washer reports a Mems sensor error.

Are blinking lights always an error code?

No. Samsung says it is a code only if the washer is also not working normally, such as stopping mid-cycle.

What should I do first when Hot & Tap Cold or Hot & Cool blink?

Power off for 2 to 3 minutes, power on and restart the cycle.

Do I need a visit for this pattern?

Samsung says to request service if the same combination returns and the issue continues. Book a visit with us.

Which lights are part of the Hot & Tap Cold or Hot & Cool pattern?

Hot & Tap Cold or Hot & Cool names 2 lights: Hot & TapCold, Hot & Cool. Samsung lists it as its own pattern, separate from every other combination of these lights.

Which similar patterns carry another reading?

No other pattern in Samsung's washer list differs from Hot & Tap Cold or Hot & Cool by a single light, so nothing close to it carries a different reading.

Let’s take care of it.

Smart appliances still
need a steady hand.