Samsung washer 8E2 / User interface

Samsung washer
error 8E2

Washer / display reference

8E2 is Samsung's jammed-button error on a washer: a panel button is detected as stuck or continuously pressed. Power off and work every button back and forth. Book a technician with us if a button is damaged or the code returns after power-on.

Also shown as 8E2

Last reviewed

Washer / display reference
Meaning
8E2 is Samsung's jammed-button error on a washer: a panel button is detected as stuck or continuously pressed. Power off and work every button back and forth. Book a technician with us if a button is damaged or the code returns after power-on.
Who handles it
Check, then book
Related codes
Source
Samsung washing machine information and error codes

What Samsung washer 8E2 means.

What it means

8E2 is Samsung's jammed-button error on a washer: a panel button is detected as stuck or continuously pressed. Power off and work every button back and forth. Book a technician with us if a button is damaged or the code returns after power-on.

What you can safely check

Before you look behind a panel, pull the plug and shut both water taps, and mop up any puddle you find.

When to call a technician

8E2 returns after both steps.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung washer 8E2: Thumb pressing a lit touch button on a washer's top control panel, with a dial and a display showing glowing segment marks
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with 8E2 one character at a time: Samsung writes it with the digit 8, a capital E and the digit 2.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Power off first

    Turn the washer off before touching the panel.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Work every button

    Touch each button one at a time and press it back and forth so all its edges move before you release it.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Inspect the panel

    Look for cracked or swollen buttons, and for water or detergent residue around them.

Still showing 8E2?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The control and its sensors.

Conceptual Washer sectionControl panelControl boardLevel sensorMotor wiring1234
  1. 1Control panel
  2. 2Control board
  3. 4Motor wiring

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Parts behind the message.

Gloved hand holding a small green circuit board with a sensor chip beside an open washer control housing with wiring

Component reference

Washer Mems sensor

Samsung lists a Mems Sensor Error among its washer "All other errors": 8E, 8C, BC, BE and their numbered forms.

Read the definition

A little more context.

What is a Samsung washer reporting with 8E2?

Samsung says a button on the panel is detected as stuck or continuously pressed. Powering off and working every button clears a button that is merely sticky.

Read the supporting manual

What should I check before I book a visit?

Turn the washer off, then press each button individually, working it back and forth to reach all its edges before you release it. Power on and see if the code returns.

Read the supporting manual

Can the washer stay in use while this shows?

The washer is safe to leave off while you check the panel. Do not pry the control panel open; moisture or damage behind it is a job for a technician.

Read the supporting manual

How is 8E2 different from the codes near it?

4E2 (Hot/cold error) differs from 8E2 by a single character, and Samsung lists it as a separate entry for this washer. 8C2 (Mems Sensor Error) differs from 8E2 by a single character, and Samsung lists it as a separate entry for this washer.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung washing machine information and error codes

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article

Scope: Samsung washers, all models unless the article notes otherwise. Source: Samsung washing machine information and error codes (Samsung US support article TSG10000997), checked November 2026. The entry used for 8E2 is printed as: "E2, bE2, 6E2, BE2*, 8E2*: Jammed button error" (TSG10000997, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung washer reporting with 8E2?

Samsung says a button on the panel is detected as stuck or continuously pressed. Powering off and working every button clears a button that is merely sticky.

Can detergent residue cause a stuck button?

Samsung does not name a cause. A sticky film around a button is a reasonable thing to look for, and working each button back and forth is the printed fix.

What if the code returns right after power-on?

Samsung says that, or any damaged button, is the point to request service.

Can 8E2 be misread on the display?

On a small display the 8 in 8E2 can be taken for B. Samsung's washer list has no row spelled that way, so 8E2 is the reading to look up.

Do I need a visit for 8E2?

Book a visit with us if a button looks damaged or the code is back right after you power on.

Which other strings does Samsung print with it?

Samsung's line for Jammed button error prints 5 strings in this order: E2, bE2, 6E2, BE2, 8E2. 8E2 is number 5 of them.

Why does Samsung mark it with an asterisk?

Samsung's footnote marks 8E2 with an asterisk: on some models it is read differently, as: Mems Sensor Error. The user manual for your model decides.

Let’s take care of it.

Smart appliances still
need a steady hand.