1BC2 appears on Samsung's list of other washer errors as a Mems Sensor Error. Samsung gives the name only, with no specific steps. Power the washer off for 2 to 3 minutes, power it on and restart. Book a technician with us if it continues.
1BC2 appears on Samsung's list of other washer errors as a Mems Sensor Error. Samsung gives the name only, with no specific steps. Power the washer off for 2 to 3 minutes, power it on and restart. Book a technician with us if it continues.
Samsung washing machine information and error codes
What Samsung washer 1BC2 means.
What it means
1BC2 appears on Samsung's list of other washer errors as a Mems Sensor Error. Samsung gives the name only, with no specific steps. Power the washer off for 2 to 3 minutes, power it on and restart. Book a technician with us if it continues.
What you can safely check
Before you look behind a panel, pull the plug and shut both water taps, and mop up any puddle you find.
When to call a technician
1BC2 returns after the power-off and restart.
Your Samsung checks, remembered on this device
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Read the display
Compare the display with 1BC2 one character at a time: Samsung writes it with the digit 1, a capital B, a capital C and the digit 2.
Illustration. Follow your model’s instructions.
Check 2
Power off for 2 to 3 minutes
Turn the washer off and leave it for 2 to 3 minutes.
Illustration. Follow your model’s instructions.
Check 3
Power on and restart
Turn it back on and restart the cycle.
Illustration. Follow your model’s instructions.
Check 4
Note when it appears
Write down whether it appeared at the start or during a spin.
Still showing 1BC2?
Tell us your model and the checks you have already run, then open your request from this spot.
With 1BC2 showing, power the washer off for 2 to 3 minutes, power it back on and restart the cycle. If the code comes back, note what the washer was doing when it appeared.
14C2 (Hot/cold error) differs from 1BC2 by a single character, and Samsung lists it as a separate entry for this washer. 19C2 (Voltage error) differs from 1BC2 by a single character, and Samsung lists it as a separate entry for this washer.
Samsung washing machine information and error codes
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-06-09 (latest of three page dates: 2024-09-04, 2026-05-05, 2026-06-09); no printed revision / article
Scope: Samsung washers, all models unless the article notes otherwise. Source: Samsung washing machine information and error codes (Samsung US support article TSG10000997), checked November 2026. The entry used for 1BC2 is printed as: "8E, 8E1, 8E2, BE, BE1, BE2, 8C, BC, 8C1, 8C2, BC1, BC2, 1 8C, 1 BC, 18C1, 1BC1, 18C2, 1BC2 - Mems Sensor Error" (TSG10000997, web article).