Samsung range C-F0 / Control board

Samsung range
error C-F0

Range / display referenceC-F0

C-F0 on a Samsung range is a communication error between components in the range electronics. Induction models NSI6D*9100, NSI6D*9300 and NSI6D*9500 have a SmartThings update (firmware DE92-04769A_24052400 or later) that fixes it without service.

Also shown as C-F0

Last reviewed

Range / display referenceC-F0
Meaning
C-F0 on a Samsung range is a communication error between components in the range electronics. Induction models NSI6D*9100, NSI6D*9300 and NSI6D*9500 have a SmartThings update (firmware DE92-04769A_24052400 or later) that fixes it without service.
Who handles it
Check, then book
Related codes
Source
Samsung range or wall oven error codes

What Samsung range C-F0 means.

What it means

C-F0 on a Samsung range is a communication error between components in the range electronics. Induction models NSI6D*9100, NSI6D*9300 and NSI6D*9500 have a SmartThings update (firmware DE92-04769A_24052400 or later) that fixes it without service.

What you can safely check

Turn the breaker off before you go behind a panel; wiring and gas lines are work for a technician.

When to call a technician

C-F0 persists after the update, or your model is not on that list.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung range C-F0: Ranges in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with C-F0 one character at a time: Samsung writes it with a capital C, a hyphen, a capital F and the digit 0.

  2. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 2

    Check your model

    The software fix named by Samsung is for NSI6D*9100, NSI6D*9300 and NSI6D*9500 induction ranges.

  3. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Install the update

    Use SmartThings to install firmware DE92-04769A_24052400 or later.

  4. A technician testing a control board with a meter
    Illustration. Follow your model’s instructions.
    Check 4

    Restart

    If it persists, request service.

Still showing C-F0?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 1Keypad / touch panel
  2. 3Element wiring

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

A little more context.

What is a Samsung range reporting with C-F0?

For C-F0, Samsung says communication between components in the range electronics is interrupted. On induction models NSI6D9100, NSI6D9300 and NSI6D9500 a SmartThings software update fixes it without service.

Read the supporting manual

What should I check before I book a visit?

With C-F0 showing, on those three induction models, install the SmartThings update (firmware DE92-04769A24052400 or later). On other models, or if it persists after the update, request service.

Read the supporting manual

Can the range stay in use while this shows?

Safety with C-F0: Switch off at the breaker before disconnecting power, and let the oven cool first.

Read the supporting manual

How is C-F0 different from the codes near it?

C-10 (self diagnosis reading) differs from C-F0 by a single character, and Samsung lists it as a separate entry for this range. C-20 (oven sensor) differs from C-F0 by a single character, and Samsung lists it as a separate entry for this range.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung range or wall oven error codes

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-05-05; no printed revision / article

Scope: Samsung ranges, all models unless the article notes otherwise. Source: Samsung range or wall oven error codes (Samsung US support article TSG10003529), checked November 2026.

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung range reporting with C-F0?

Samsung says communication between components in the range electronics is interrupted. On induction models NSI6D*9100, NSI6D*9300 and NSI6D*9500 a SmartThings software update fixes it without service.

Which firmware version fixes it?

Samsung names DE92-04769A_24052400 or later for the three induction models.

Can C-F0 be misread on the display?

On a small display the 0 in C-F0 can be taken for O or o. Samsung's range list has no row spelled that way, so C-F0 is the reading to look up.

Do I need a visit for C-F0?

Book a visit with us if your model is not one of the three, or the code remains after the update.

Let’s take care of it.

Smart appliances still
need a steady hand.