Samsung range C-30 / Sensors

Samsung range
error C-30

Range / display referenceC-30

C-30 on a Samsung range, per the NE63A6711 manual, means the main PCB sensor is open, or shorted, while the oven operates. Restart; if it persists, disconnect power for at least 30 seconds, then call for service.

Also shown as C-30

Last reviewed

Range / display referenceC-30
Meaning
C-30 on a Samsung range, per the NE63A6711 manual, means the main PCB sensor is open, or shorted, while the oven operates. Restart; if it persists, disconnect power for at least 30 seconds, then call for service.
Who handles it
Technician visit
Source
Electric Range User manual NE63*671*S*

What Samsung range C-30 means.

What it means

C-30 on a Samsung range, per the NE63A6711 manual, means the main PCB sensor is open, or shorted, while the oven operates. Restart; if it persists, disconnect power for at least 30 seconds, then call for service.

What you can safely check

Turn the breaker off before you go behind a panel; wiring and gas lines are work for a technician.

When to call a technician

C-30 remains once power has been cut and restored.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung range C-30: Ranges in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with C-30 one character at a time: Samsung writes it with a capital C, a hyphen, the digit 3 and the digit 0.

  2. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 2

    Press OFF/CLEAR

    Then restart.

  3. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Disconnect power

    At least 30 seconds, then reconnect.

  4. A technician testing a control board with a meter
    Illustration. Follow your model’s instructions.
    Check 4

    Call for service

    If it does not clear.

Still showing C-30?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The oven temperature sensor.

Conceptual Range / oven sectionTemperature sensorWiringControl123
  1. 1Temperature sensor
  2. 2Wiring
  3. 3Control

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Parts behind the message.

Front control cover of a slide-in range lies removed on the counter while a hand with a screwdriver reaches a green circuit board

Component reference

Range main PCB sensor

C-30 on Samsung's NE63*671*S* electric range is printed as: the main PCB sensor is open, or shorted, while the oven is operating.

Read the definition

A little more context.

What is a Samsung range reporting with C-30?

For C-30, the NE63A6711 range manual says the main PCB sensor is open when the oven is operating, and lists a matching short. The wall oven manuals print the same code for a PCB sensor.

Read the supporting manual

What should I check before I book a visit?

With C-30 showing, press OFF/CLEAR and restart. If it persists, disconnect all power to the range for at least 30 seconds, reconnect, and call for service if that does not solve it.

Read the supporting manual

Can the range stay in use while this shows?

Safety with C-30: Switch off at the breaker before disconnecting power.

Read the supporting manual

How is C-30 different from the codes near it?

C-10 (self diagnosis reading) differs from C-30 by a single character, and Samsung lists it as a separate entry for this range. C-20 (oven sensor) differs from C-30 by a single character, and Samsung lists it as a separate entry for this range.

Read the supporting manual

The manual behind the message.

Manufacturer document

Electric Range User manual NE63*671*S*

Samsung Electronics America (official manual PDF, downloadcenter.samsung.com)

Samsung user manual PDF created 14.02.2025 (no printed revision code on the cover); has a Warranty (U.S.A.) section with Samsung Electronics America, Inc., Ridgefield Park, NJ / PDF p57

Scope: NE63*671*S* electric slide-in ranges (NE63A6711SS/AC listed on the download page). Source: Electric Range User manual NE63*671*S*, checked November 2026.

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung range reporting with C-30?

The NE63A6711 range manual says the main PCB sensor is open when the oven is operating, and lists a matching short. The wall oven manuals print the same code for a PCB sensor.

Does the wall oven use the same code?

Yes, the wall oven manuals print C-30 for a PCB sensor that is open or short.

Can C-30 be misread on the display?

On a small display the 0 in C-30 can be taken for O or o. Samsung's range list has no row spelled that way, so C-30 is the reading to look up.

Do I need a visit for C-30?

Book a visit with us if the power reset does not clear it.

Let’s take care of it.

Smart appliances still
need a steady hand.