What it means
For a Samsung range code that is not listed, turn the range off and on with the Power button. If it returns, switch the breaker off for 30 seconds and back on, then request service.
Samsung range All other error codes / Reset only
For a Samsung range code that is not listed, turn the range off and on with the Power button. If it returns, switch the breaker off for 30 seconds and back on, then request service.
Also shown as All other error codes
For a Samsung range code that is not listed, turn the range off and on with the Power button. If it returns, switch the breaker off for 30 seconds and back on, then request service.
Turn the breaker off before you go behind a panel; wiring and gas lines are work for a technician.
The code returns after the breaker reset.
Your Samsung checks, remembered on this device

Note exactly what the display shows, including capitals and spaces, before you act on it.

Use the Power button on the range.

If the code returns, switch the breaker off and back on.

Write down exactly what the display showed.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visitThis is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
For All other error codes: Samsung gives one ladder for every unlisted range code: Power button off and on, then the breaker off for 30 seconds, then service.
Read the supporting manualWith All other error codes showing, turn the range off and on with the Power button. If the code returns, switch its breaker off for 30 seconds and back on.
Read the supporting manualSafety with All other error codes: Switch off at the breaker only with the oven and cooktop cool and empty.
Read the supporting manualOn a small display the l in All other error codes can be taken for 1. Samsung's range list has no row spelled that way, so All other error codes is the reading to look up.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-05; no printed revision / article
Scope: Samsung ranges, all models unless the article notes otherwise. Source: Samsung range or wall oven error codes (Samsung US support article TSG10003529), checked November 2026.
Samsung gives one ladder for every unlisted range code: Power button off and on, then the breaker off for 30 seconds, then service.
Samsung's article applies the same three steps to any code it does not list.
On a small display the l in All other error codes can be taken for 1. Samsung's range list has no row spelled that way, so All other error codes is the reading to look up.
Book a visit with us if the code returns after both resets.
Samsung codes, symptoms, parts, house calls
Cooktop in use on a Samsung range means Self Clean cannot start because a cooktop burner or element is still on. Turn every burner or element off, then start Self Clean again.
For burners that will not light, the Samsung gas range manual lists the plug and fuse or breaker, the gas supply, the control knob not pressed in to the Lite position, burner caps off or the base misaligned, and dirty electrodes. Check those. If you smell gas, turn the knob off, clear the room and call your gas supplier.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.