What it means
C-10 on a Samsung range can appear during SmartThings self diagnosis and is not a problem on its own. If it comes up by itself during cooking, try resetting the oven.
Samsung range C-10 / Information
C-10 on a Samsung range can appear during SmartThings self diagnosis and is not a problem on its own. If it comes up by itself during cooking, try resetting the oven.
Also shown as C-10
C-10 on a Samsung range can appear during SmartThings self diagnosis and is not a problem on its own. If it comes up by itself during cooking, try resetting the oven.
Turn the breaker off before you go behind a panel; wiring and gas lines are work for a technician.
C-10 appears on its own during cooking even after a reset.
Your Samsung checks, remembered on this device

Compare the display with C-10 one character at a time: Samsung writes it with a capital C, a hyphen, the digit 1 and the digit 0.

Was SmartThings self diagnosis running when it appeared?

If it heats normally, the code can be disregarded.

If it came up on its own during cooking, reset the oven.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visitThis is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
For C-10, Samsung says it can show during SmartThings self diagnosis on an oven, and it does not indicate a problem unless it appears outside the test.
Read the supporting manualWith C-10 showing, if it showed during the self diagnosis test and the oven heats normally, nothing is wrong. If it came up during cooking, reset the oven.
Read the supporting manualSafety with C-10: If the oven is not heating normally, treat it as a real problem and stop using it until it is checked.
Read the supporting manualC-20 (oven sensor) differs from C-10 by a single character, and Samsung lists it as a separate entry for this range. C-30 (main PCB sensor) differs from C-10 by a single character, and Samsung lists it as a separate entry for this range.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-05; no printed revision / article
Scope: Samsung ranges, all models unless the article notes otherwise. Source: Samsung range or wall oven error codes (Samsung US support article TSG10003529), checked November 2026.
Samsung says it can show during SmartThings self diagnosis on an oven, and it does not indicate a problem unless it appears outside the test.
Only when it appears outside the test, per Samsung.
On a small display the 1 in C-10 can be taken for I or l. Samsung's range list has no row spelled that way, so C-10 is the reading to look up.
Book a visit with us if it returns by itself during cooking after a reset.
Samsung codes, symptoms, parts, house calls
Cooktop in use on a Samsung range means Self Clean cannot start because a cooktop burner or element is still on. Turn every burner or element off, then start Self Clean again.
For burners that will not light, the Samsung gas range manual lists the plug and fuse or breaker, the gas supply, the control knob not pressed in to the Lite position, burner caps off or the base misaligned, and dirty electrodes. Check those. If you smell gas, turn the knob off, clear the room and call your gas supplier.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.