Samsung dryer FE / Power supply

Samsung dryer
error FE

Dryer / display reference

FE is a frequency error on a Samsung dryer: an invalid power source frequency. Samsung says to try restarting the cycle. Book a technician with us if the code remains.

Also shown as FE

Last reviewed

Dryer / display reference
Meaning
FE is a frequency error on a Samsung dryer: an invalid power source frequency. Samsung says to try restarting the cycle. Book a technician with us if the code remains.
Who handles it
Reset, then book
Related codes
Source
Samsung dryer displays an error code

What Samsung dryer FE means.

What it means

FE is a frequency error on a Samsung dryer: an invalid power source frequency. Samsung says to try restarting the cycle. Book a technician with us if the code remains.

What you can safely check

Pull the plug before you work near the vent run or a panel.

When to call a technician

FE returns on the restarted cycle.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung dryer FE: Black four-wire dryer power cord running from the back of a white dryer to a wall receptacle, with a closed gray breaker panel cover on the wall above.
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with FE one character at a time: Samsung writes it with a capital F and a capital E.

  2. Dryers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Restart the cycle

    Samsung's only printed step is to restart the cycle.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Check the outlet

    Confirm the dryer is plugged in directly to the wall outlet.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Note recent changes

    Write down whether the dryer was recently moved or the power went out.

Still showing FE?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

Heat and its safety limits.

Conceptual Dryer sectionHeaterThermostat / fuseDrumControl1234
  1. 2Thermostat / fuse
  2. 3Drum
  3. 4Control

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

A little more context.

What is a Samsung dryer reporting with FE?

Samsung says these codes mean the dryer sees an invalid power source frequency.

Read the supporting manual

What should I check before I book a visit?

Restart the cycle. If the dryer has been moved, check whether it is meant for your country's power supply.

Read the supporting manual

Can the dryer stay in use while this shows?

Do not open the cord connection. A power supply question is for an electrician.

Read the supporting manual

How is FE different from the codes near it?

Read FE as a capital F and a capital E. No other Samsung dryer row on this site uses those characters, so there is no near neighbor to mix it up with.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung dryer displays an error code

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-05-04; no printed revision / article

Scope: Samsung dryers, all models unless the article notes otherwise. Source: Samsung dryer displays an error code (Samsung US support article TSG10001006), checked November 2026. The entry used for FE is printed as: "Frequency errors (FC, FE, 1 FC)" (TSG10001006, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung dryer reporting with FE?

Samsung says these codes mean the dryer sees an invalid power source frequency.

Is this the same as a voltage error?

No. Samsung lists frequency errors separately from voltage errors, with their own strings.

What is power source frequency?

The rate at which the household supply alternates, which differs between countries. Samsung's page does not go further than restarting the cycle.

Can I fix a frequency reading at home?

The printed step is to restart the cycle. Anything beyond that, such as supply or wiring, is for an electrician or technician.

How should I read FE on the display?

Read it as a capital F and a capital E. Samsung's dryer list has no other row with these characters.

Do I need a visit for FE?

Samsung says to request service if the code remains after a restart. Book a visit with us then.

Let’s take care of it.

Smart appliances still
need a steady hand.