What it means
FC is a frequency error on a Samsung dryer: an invalid power source frequency. Samsung says to try restarting the cycle. Book a technician with us if the code remains.
Samsung dryer FC / Power supply
FC is a frequency error on a Samsung dryer: an invalid power source frequency. Samsung says to try restarting the cycle. Book a technician with us if the code remains.
Also shown as FC
FC is a frequency error on a Samsung dryer: an invalid power source frequency. Samsung says to try restarting the cycle. Book a technician with us if the code remains.
Pull the plug before you work near the vent run or a panel.
FC returns on the restarted cycle.
Your Samsung checks, remembered on this device

Compare the display with FC one character at a time: Samsung writes it with a capital F and a capital C.

Samsung's only printed step is to restart the cycle.

Confirm the dryer is plugged in directly to the wall outlet.

Write down whether the dryer was recently moved or the power went out.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visit
This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
Samsung says these codes mean the dryer sees an invalid power source frequency.
Read the supporting manualRestart the cycle. If the dryer has been moved, check whether it is meant for your country's power supply.
Read the supporting manualDo not open the cord connection. A power supply question is for an electrician.
Read the supporting manualRead FC as a capital F and a capital C. No other Samsung dryer row on this site uses those characters, so there is no near neighbor to mix it up with.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-04; no printed revision / article
Scope: Samsung dryers, all models unless the article notes otherwise. Source: Samsung dryer displays an error code (Samsung US support article TSG10001006), checked November 2026. The entry used for FC is printed as: "Frequency errors (FC, FE, 1 FC)" (TSG10001006, web article).
Samsung says these codes mean the dryer sees an invalid power source frequency.
No. Samsung lists frequency errors separately from voltage errors, with their own strings.
The rate at which the household supply alternates, which differs between countries. Samsung's page does not go further than restarting the cycle.
The printed step is to restart the cycle. Anything beyond that, such as supply or wiring, is for an electrician or technician.
Read it as a capital F and a capital C. Samsung's dryer list has no other row with these characters.
Samsung says to request service if the code remains after a restart. Book a visit with us then.
Samsung codes, symptoms, parts, house calls
FE is a frequency error on a Samsung dryer: an invalid power source frequency. Samsung says to try restarting the cycle. Book a technician with us if the code remains.
Samsung says a dryer that powers on but will not spin usually needs service. Before that, look for an error code, turn off Child Lock (its icon is lit), then run the Time Dry test: if the timer counts down and the drum stays motionless, the dryer needs a technician. If the buttons will not respond at all, Child Lock is the usual reason.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.