What it means
bE is a jammed-button error on a Samsung dryer: a panel button is detected as stuck. Power off and touch and release every button, working each back and forth. Book a technician with us if a button is damaged or the code returns.
Samsung dryer bE / User interface
bE is a jammed-button error on a Samsung dryer: a panel button is detected as stuck. Power off and touch and release every button, working each back and forth. Book a technician with us if a button is damaged or the code returns.
Also shown as bE
bE is a jammed-button error on a Samsung dryer: a panel button is detected as stuck. Power off and touch and release every button, working each back and forth. Book a technician with us if a button is damaged or the code returns.
Pull the plug before you work near the vent run or a panel.
BE comes back after every button has been worked free.
Your Samsung checks, remembered on this device

Compare the display with bE one character at a time: Samsung writes it with a lowercase b and a capital E.

Turn the dryer off at the panel.

Touch and release each button individually, rocking it so all edges move.

Look for cracked buttons or residue around them.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visit
This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
For bE, Samsung says a button on the panel is detected as stuck or continuously pressed.
Read the supporting manualPower the dryer off, then touch and release every button on the panel, working back and forth to reach all its edges.
Read the supporting manualKeep the panel dry and do not pry it open. Unplug the dryer if you see signs of liquid or damage on the panel.
Read the supporting manual6E differs from bE only by a look-alike character, b against 6. Samsung lists both under Jammed button errors, so they carry the same meaning.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-04; no printed revision / article
Scope: Samsung dryers, all models unless the article notes otherwise. Source: Samsung dryer displays an error code (Samsung US support article TSG10001006), checked November 2026. The entry used for bE is printed as: "Jammed button errors (bE, bE2, bC2, 6E, 6E2, 6C2)" (TSG10001006, web article).
Samsung says a button on the panel is detected as stuck or continuously pressed.
Samsung's washer and dishwasher lists use similar button codes, each with its own page. Match the string to the appliance you have.
All of them. Samsung says to touch and release every button on the panel, working each back and forth to reach all its edges.
It can be. Residue around a button is worth wiping off with the dryer unplugged, but Samsung's printed step is the touch-and-release routine.
6E differs from bE only by a look-alike character, b against 6. Samsung lists both under Jammed button errors, so they carry the same meaning.
Samsung says to request service if a button is damaged or the code returns after power-on. Book a visit with us then.
Samsung's line for Jammed button errors prints 6 strings in this order: bE, bE2, bC2, 6E, 6E2, 6C2. bE is number 1 of them.
Samsung codes, symptoms, parts, house calls
bE2 is a jammed-button error on a Samsung dryer: a panel button is detected as stuck. Power off and touch and release every button, working each back and forth. Book a technician with us if a button is damaged or the code returns.
Samsung says a dryer that powers on but will not spin usually needs service. Before that, look for an error code, turn off Child Lock (its icon is lit), then run the Time Dry test: if the timer counts down and the drum stays motionless, the dryer needs a technician. If the buttons will not respond at all, Child Lock is the usual reason.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.