What it means
C1 is a Vent Blockage test result on a Samsung dryer: laundry was detected inside the drum, so the test could not run. Empty the drum, let it cool, and start the test again. If C1 shows with an empty drum, book a technician with us.
Samsung dryer C1 / Vent and airflow
C1 is a Vent Blockage test result on a Samsung dryer: laundry was detected inside the drum, so the test could not run. Empty the drum, let it cool, and start the test again. If C1 shows with an empty drum, book a technician with us.
Also shown as C1
C1 is a Vent Blockage test result on a Samsung dryer: laundry was detected inside the drum, so the test could not run. Empty the drum, let it cool, and start the test again. If C1 shows with an empty drum, book a technician with us.
Pull the plug before you work near the vent run or a panel.
C1 appears again with nothing in the drum.
Your Samsung checks, remembered on this device

Compare the display with C1 one character at a time: Samsung writes it with a capital C and the digit 1.

Take every item out of the drum. Samsung says the drum must be empty to run the Vent Blockage test.

Samsung starts the test from a cool, empty drum, so give the dryer time before the next try.

Press Adjust Time Up and Dry Level together until "Ins" or "In" appears, then hold Start/Pause. If that fails, Samsung names Cycle 1 with Wrinkle Prevent, or Air Fluff with Wrinkle Prevent. Keep the door shut.

The result stays on the display for about five minutes. "0" or "End" means the duct system is normal and unblocked.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visitThis is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
It means the dryer found laundry in the drum. Samsung files C1 among the Vent Blockage test results, which only appear after that test has been run, and pairs it with CL1 on one row.
Read the supporting manualNo. C1 says the test could not take a reading. The clog results are Clg, Cg, C80 and C90, and the test article says "0" or "End" means the duct system is normal and unblocked.
Read the supporting manualEmpty the drum completely and let it cool, then run the test again with the door shut. The test article puts it as "Empty the drum and run the test again."
Read the supporting manualC1 and CL1 share one row and one meaning. The digit 1 right after the C is what marks C1; a capital L between them makes it CL1, and CL alone is Samsung's separate Child Lock entry.
Read the supporting manualSamsung gives no warning for C1 itself, because it comes from the test and not from a cycle. Pull the plug before you work near the vent run or a panel.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-04; no printed revision / article
Manufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-05; no printed revision / article
Manufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-04; no printed revision / article
Scope: Samsung dryers, all models unless the article notes otherwise. Source: Samsung dryer displays an error code; Clothes are not dry after using Samsung dryer (Samsung US support article TSG10001001, TSG10001006), checked November 2026. The entry used for C1 is printed as: "C1, CL1: Laundry is detected inside the drum." (TSG10001006, web article).
Samsung says laundry is detected inside the drum. It shows after a Vent Blockage test was started with clothes still in the dryer.
No. It means the test could not run. Clog readings are Clg, Cg, C80 and C90. After you empty the drum and test again, "0" or "End" means the duct system is normal.
With the drum cool and empty, press Adjust Time Up and Dry Level together until "Ins" or "In" shows, then hold Start/Pause. Keep the door shut during the test.
Samsung's list says to request service when C1 appears with an empty drum. Book a visit with us and tell us the drum was empty and the test was started cool.
Samsung prints them on one row with one meaning. The digit 1 right after the C marks C1.
Samsung codes, symptoms, parts, house calls
Clg on a Samsung dryer is a Vent Blockage test result, shown only after that test has run. Samsung's list gives the clogged-vent readings and what to clean. Book a technician with us if the result persists after cleaning.
Samsung says a dryer that powers on but will not spin usually needs service. Before that, look for an error code, turn off Child Lock (its icon is lit), then run the Time Dry test: if the timer counts down and the drum stays motionless, the dryer needs a technician. If the buttons will not respond at all, Child Lock is the usual reason.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.