Samsung dishwasher LE / Water and drain

Samsung dishwasher
error LE

Dishwasher / display referenceLE

LE is Samsung's leakage error on a dishwasher: the leak sensor detects moisture. The dishwasher turns itself on and will not turn off while it tries to drain the water. On Waterwall models also check that the reflector is not blocked.

Also shown as LE

Last reviewed

Dishwasher / display referenceLE
Meaning
LE is Samsung's leakage error on a dishwasher: the leak sensor detects moisture. The dishwasher turns itself on and will not turn off while it tries to drain the water. On Waterwall models also check that the reflector is not blocked.
Who handles it
Technician — close the water supply
Related codes
Source
Samsung dishwasher is displaying an error code

What Samsung dishwasher LE means.

What it means

LE is Samsung's leakage error on a dishwasher: the leak sensor detects moisture. The dishwasher turns itself on and will not turn off while it tries to drain the water. On Waterwall models also check that the reflector is not blocked.

What you can safely check

Cut power to the dishwasher at its breaker before you reach into the base or behind a panel, and clear up any standing water first.

When to call a technician

LE returns, or water keeps appearing around the dishwasher.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung dishwasher LE: A gloved, wet hand lifts the cylindrical mesh filter out of the dishwasher sump, with a little water in the basin below and a spray arm lying aside.
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with LE one character at a time: Samsung writes it with a capital L and a capital E.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Cut power and water

    Switch off at the breaker and close the supply valve.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Look for the leak

    Check under the dishwasher, behind the kick plate and around the door seal.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Check the reflector

    On Waterwall models, make sure the water reflector is not blocked.

Still showing LE?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

Where a leak is caught.

Conceptual dishwasher sectionTub seam / gasketBase panFloat switchInlet valve1234
  1. 1Tub seam / gasket
  2. 2Base pan
  3. 3Float switch
  4. 4Inlet valve

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Parts behind the message.

A hand lifts a flat gray plastic vane above a rail inside a stainless dishwasher tub, filter cup visible at the bottom

Component reference

Dishwasher Waterwall reflector

The Waterwall reflector is the part behind 7E and 7C on a Samsung dishwasher.

Read the definition
Built-in dishwasher front with a puddle of water spreading across the tile floor and a folded gray cloth at its base

Component reference

Dishwasher leak sensor

LC and LE are Samsung's leakage error: the leak sensor detects moisture.

Read the definition

A little more context.

What is a Samsung dishwasher reporting with LE?

For LE, Samsung says the leak sensor detects moisture. The dishwasher turns itself on and will not turn off while it tries to drain the water. On Waterwall models, check the water reflector is not blocked.

Read the supporting manual

What should I check before I book a visit?

With LE showing, look for water under and around the dishwasher and check the Waterwall reflector, if your model has one, is not blocked. Switch off at the breaker if the water keeps running.

Read the supporting manual

Can the dishwasher stay in use while this shows?

Safety with LE: Leaking water and electricity do not mix. Switch off at the breaker and shut the supply before you inspect, and mop up first.

Read the supporting manual

How is LE different from the codes near it?

The same characters also appear on a washer, where Samsung ties it to Water level or leakage error. Check which appliance you are standing in front of.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung dishwasher is displaying an error code

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-05-01; no printed revision / article

Scope: Samsung dishwashers, all models unless the article notes otherwise. Source: Samsung dishwasher is displaying an error code (Samsung US support article TSG10004499), checked November 2026. The entry used for LE is printed as: "LC, LE - Leakage error" (TSG10004499, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung dishwasher reporting with LE?

Samsung says the leak sensor detects moisture. The dishwasher turns itself on and will not turn off while it tries to drain the water. On Waterwall models, check the water reflector is not blocked.

Why won't the dishwasher turn off?

Samsung says it turns itself on and stays on while it tries to drain the water the leak sensor found.

Why does the dishwasher keep running by itself?

Samsung says that with this code the dishwasher turns itself on and will not turn off while it tries to drain the water. Cutting power at the breaker stops it.

Where do dishwashers commonly leak from?

Samsung's page does not list leak points for this code. Common places to look are the door seal, the supply connection and the drain hose connection, with the power off.

Does LE mean the same on a washer?

The same characters also appear on a washer, where Samsung ties it to Water level or leakage error. Check which appliance you are standing in front of.

Do I need a visit for LE?

Book a visit with us if you find a leak you cannot fix, or the code remains after the water is cleared.

Which other strings does Samsung print with it?

Samsung's line for Leakage error prints 2 strings in this order: LC, LE. LE is number 2 of them.

Let’s take care of it.

Smart appliances still
need a steady hand.