Inside the appliance
Dishwasher Waterwall reflector. In plain English.
The Waterwall reflector is the part behind 7E and 7C on a Samsung dishwasher. It cannot move, usually because something blocks it or it was not reattached correctly. Samsung also asks you to check it for LC and LE on Waterwall models.

Where it fits.
Dishwasher Waterwall reflector in the appliance
Samsung describes a vane that sits on a gray shuttle on the Waterwall rail.
The picture shows a typical example of this component. It does not tell you which replacement fits your model.
What shifts once this system needs attention.
Dishwasher Waterwall reflector problems can arrive with weaker performance or a code that keeps coming back. A component is tested before anyone decides it is to blame.
Owner care, within the model instructions.
Switch the appliance off and unplug it before any check of your own. Look out for pooled water and jagged debris. Never touch a wet plug or an electrical area, take off a service panel or go past what your model's owner instructions allow.
- 1
Look for a blockage
Samsung names a pot handle, large knife or ladle as items that can hold the reflector in place.
- 2
Check its position
In the correct position the Waterwall logo faces forward and upwards.
- 3
Reseat it
If it is installed wrongly, lift up on the vane, turn it around and reseat it on the gray shuttle on the Waterwall rail. Then power cycle for two minutes at the breaker.
Cleaning or replacement?
Leave internal testing to a technician.
7E or 7C returns after the reflector is clear and seated.
The blinking lights remain after the power cycle.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Dishwasher Waterwall reflector advice. Choose the manual that fits your model.
- Waterwall reflector error code 7E on Samsung dishwasher
- Samsung dishwasher is displaying an error code
Follow the user manual for your exact model. See how we research these pages.
What do 7E and 7C mean?
Samsung says the Waterwall reflector is unable to move, so something is blocking it or holding it in place.
Can installing it wrong cause this?
Yes. Samsung says it can happen if the reflector was not reattached correctly.
Does it matter for LC and LE?
On Waterwall models Samsung says an LC or LE can also mean the water reflector is blocked, so check it as well.
How do I power cycle?
Cut the dishwasher's power at the panel, wait two minutes, then restore it.
Samsung codes, symptoms, parts, house calls
From the message to what comes next.
7E
7E is Samsung's Waterwall reflector error on a dishwasher: the reflector cannot move correctly. Something blocks it or it is seated wrongly. Samsung prints this as 7E or 7C in its reflector guide. Book a technician with us if it persists.
Samsung dishwasher won't turn on
Samsung's article for a dishwasher that does not turn on lists a short set of checks: touch Power with dry hands, wipe a grimy Power button, look for a tripped breaker, and find the wall switch some kitchens have. If it has done this since installation, Samsung says service is not the answer and the installer should check the electrical supply.
Dishwasher repair
Book a diagnostic for your exact model, carried out beside the appliance.
Find your metro
Office details, and the access notes to send us.

