What it means
LC is Samsung's leakage error on a dishwasher: the leak sensor detects moisture. The dishwasher turns itself on and will not turn off while it tries to drain the water. On Waterwall models also check that the reflector is not blocked.
Samsung dishwasher LC / Water and drain
LC is Samsung's leakage error on a dishwasher: the leak sensor detects moisture. The dishwasher turns itself on and will not turn off while it tries to drain the water. On Waterwall models also check that the reflector is not blocked.
Also shown as LC
LC is Samsung's leakage error on a dishwasher: the leak sensor detects moisture. The dishwasher turns itself on and will not turn off while it tries to drain the water. On Waterwall models also check that the reflector is not blocked.
Cut power to the dishwasher at its breaker before you reach into the base or behind a panel, and clear up any standing water first.
LC returns, or water keeps appearing around the dishwasher.
Your Samsung checks, remembered on this device

Compare the display with LC one character at a time: Samsung writes it with a capital L and a capital C.

Switch off at the breaker and close the supply valve.

Check under the dishwasher, behind the kick plate and around the door seal.

On Waterwall models, make sure the water reflector is not blocked.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visitThis is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Component reference
The Waterwall reflector is the part behind 7E and 7C on a Samsung dishwasher.
Read the definition
Component reference
LC and LE are Samsung's leakage error: the leak sensor detects moisture.
Read the definitionFor LC, Samsung says the leak sensor detects moisture. The dishwasher turns itself on and will not turn off while it tries to drain the water. On Waterwall models, check the water reflector is not blocked.
Read the supporting manualWith LC showing, look for water under and around the dishwasher and check the Waterwall reflector, if your model has one, is not blocked. Switch off at the breaker if the water keeps running.
Read the supporting manualSafety with LC: Leaking water and electricity do not mix. Switch off at the breaker and shut the supply before you inspect, and mop up first.
Read the supporting manualThe same characters also appear on a washer, where Samsung ties it to Water level or leakage error. Check which appliance you are standing in front of.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-01; no printed revision / article
Scope: Samsung dishwashers, all models unless the article notes otherwise. Source: Samsung dishwasher is displaying an error code (Samsung US support article TSG10004499), checked November 2026. The entry used for LC is printed as: "LC, LE - Leakage error" (TSG10004499, web article).
Samsung says the leak sensor detects moisture. The dishwasher turns itself on and will not turn off while it tries to drain the water. On Waterwall models, check the water reflector is not blocked.
Samsung says it turns itself on and stays on while it tries to drain the water the leak sensor found.
Samsung says that with this code the dishwasher turns itself on and will not turn off while it tries to drain the water. Cutting power at the breaker stops it.
Samsung's page does not list leak points for this code. Common places to look are the door seal, the supply connection and the drain hose connection, with the power off.
The same characters also appear on a washer, where Samsung ties it to Water level or leakage error. Check which appliance you are standing in front of.
Book a visit with us if you find a leak you cannot fix, or the code remains after the water is cleared.
Samsung's line for Leakage error prints 2 strings in this order: LC, LE. LC is number 1 of them.
Samsung codes, symptoms, parts, house calls
LE is Samsung's leakage error on a dishwasher: the leak sensor detects moisture. The dishwasher turns itself on and will not turn off while it tries to drain the water. On Waterwall models also check that the reflector is not blocked.
Samsung's article for a dishwasher that does not turn on lists a short set of checks: touch Power with dry hands, wipe a grimy Power button, look for a tripped breaker, and find the wall switch some kitchens have. If it has done this since installation, Samsung says service is not the answer and the installer should check the electrical supply.
The Waterwall reflector is the part behind 7E and 7C on a Samsung dishwasher. It cannot move, usually because something blocks it or it was not reattached correctly. Samsung also asks you to check it for LC and LE on Waterwall models.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.