What it means
AP on a Samsung dishwasher means it is in Access Point mode, which helps connect it to a mobile device. It is a connection mode, not a failure. If you are not trying to connect it, turn the dishwasher off and back on.
Samsung dishwasher AP / Information
AP on a Samsung dishwasher means it is in Access Point mode, which helps connect it to a mobile device. It is a connection mode, not a failure. If you are not trying to connect it, turn the dishwasher off and back on.
Also shown as AP
AP on a Samsung dishwasher means it is in Access Point mode, which helps connect it to a mobile device. It is a connection mode, not a failure. If you are not trying to connect it, turn the dishwasher off and back on.
Cut power to the dishwasher at its breaker before you reach into the base or behind a panel, and clear up any standing water first.
AP stays on after the power-cycle.
Your Samsung checks, remembered on this device

Compare the display with AP one character at a time: Samsung writes it with a capital A and a capital P.

If you are setting up the app, continue with the pairing.

Turn the dishwasher off and back on.

Confirm the code is gone and the dishwasher starts a cycle.
Tell us your model and the checks you have already run, then open your request from this spot.
Book a visit

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.
Samsung says the dishwasher is in Access Point mode to assist with connecting to a mobile device.
Read the supporting manualIf you are not setting up a connection, turn the dishwasher off and back on.
Read the supporting manualNo hazard applies; it is a connection mode.
Read the supporting manualThe same characters also appear on a refrigerator, where Samsung ties it to Access Point. Check which appliance you are standing in front of.
Read the supporting manualManufacturer document
Samsung Electronics America (official US support article, samsung.com/us)
page meta date 2026-05-01; no printed revision / article
Scope: Samsung dishwashers, all models unless the article notes otherwise. Source: Samsung dishwasher is displaying an error code (Samsung US support article TSG10004499), checked November 2026. The entry used for AP is printed as: "AP - Access Point mode" (TSG10004499, web article).
Samsung says the dishwasher is in Access Point mode to assist with connecting to a mobile device.
Samsung does not say; the printed step is to turn it off and on if you are not trying to connect.
The same characters also appear on a refrigerator, where Samsung ties it to Access Point. Check which appliance you are standing in front of.
No service is called for. Book a visit with us only if the dishwasher cannot leave the mode after a restart.
Samsung codes, symptoms, parts, house calls
3C is Samsung's pump operation error on a dishwasher: the pump has failed. Turn the dishwasher off and try the cycle again. Book a technician with us if the error still occurs.
Samsung's article for a dishwasher that does not turn on lists a short set of checks: touch Power with dry hands, wipe a grimy Power button, look for a tripped breaker, and find the wall switch some kitchens have. If it has done this since installation, Samsung says service is not the answer and the installer should check the electrical supply.
Book a diagnostic for your exact model, carried out beside the appliance.
Office details, and the access notes to send us.