Inside the appliance
Dishwasher leak sensor. In plain English.
LC and LE are Samsung's leakage error: the leak sensor detects moisture. The dishwasher turns itself on and will not turn off while it tries to drain the water. On Waterwall models Samsung adds a reflector check.

Where it fits.
Dishwasher leak sensor in the appliance
Samsung's article does not give the sensor's position.
The picture shows a typical example of this component. It does not tell you which replacement fits your model.
What shifts once this system needs attention.
Dishwasher leak sensor problems can arrive with weaker performance or a code that keeps coming back. A component is tested before anyone decides it is to blame.
Owner care, within the model instructions.
Switch the appliance off and unplug it before any check of your own. Look out for pooled water and jagged debris. Never touch a wet plug or an electrical area, take off a service panel or go past what your model's owner instructions allow.
- 1
Let it drain
Samsung says the dishwasher turns itself on and tries to drain; it will not turn off during that time.
- 2
Check the reflector
On Waterwall models the code can also mean the water reflector is blocked, so check that as well.
- 3
Mop up
Wipe up any water on the floor, and switch the dishwasher off at the breaker if it keeps running with water visible.
Cleaning or replacement?
Leave internal testing to a technician.
LC or LE returns after the tub drains and the reflector is clear.
Water is on the floor under or around the dishwasher.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Dishwasher leak sensor advice. Choose the manual that fits your model.
- Samsung dishwasher is displaying an error code
- Waterwall reflector error code 7E on Samsung dishwasher
Follow the user manual for your exact model. See how we research these pages.
Why does it start by itself?
Samsung says that with LC or LE the dishwasher turns itself on and will not turn off while it attempts to drain the water.
Is the sensor the problem?
Not necessarily. Samsung says the sensor detects moisture; the moisture may be real. Look for a leak first.
Do I need to unplug it?
Once water reaches the floor, cut the dishwasher's power at the panel first. We book a visit once the water is safely handled.
When do I book?
When LC or LE returns after the tub is drained, or any time water reaches the floor.
Samsung codes, symptoms, parts, house calls
From the message to what comes next.
LC
LC is Samsung's leakage error on a dishwasher: the leak sensor detects moisture. The dishwasher turns itself on and will not turn off while it tries to drain the water. On Waterwall models also check that the reflector is not blocked.
Samsung dishwasher won't turn on
Samsung's article for a dishwasher that does not turn on lists a short set of checks: touch Power with dry hands, wipe a grimy Power button, look for a tripped breaker, and find the wall switch some kitchens have. If it has done this since installation, Samsung says service is not the answer and the installer should check the electrical supply.
Dishwasher repair
Book a diagnostic for your exact model, carried out beside the appliance.
Find your metro
Office details, and the access notes to send us.

