Samsung dishwasher oE / Water and drain

Samsung dishwasher
error oE

Dishwasher / display referenceoE

oE is Samsung's over-level water error on a dishwasher: there is more water in it than there should be. Samsung points to its drain and overflow guide. Book a technician with us if it persists.

Also shown as oE

Last reviewed

Dishwasher / display referenceoE
Meaning
oE is Samsung's over-level water error on a dishwasher: there is more water in it than there should be. Samsung points to its drain and overflow guide. Book a technician with us if it persists.
Who handles it
Check, then book
Related codes
Source
Samsung dishwasher is displaying an error code

What Samsung dishwasher oE means.

What it means

oE is Samsung's over-level water error on a dishwasher: there is more water in it than there should be. Samsung points to its drain and overflow guide. Book a technician with us if it persists.

What you can safely check

Cut power to the dishwasher at its breaker before you reach into the base or behind a panel, and clear up any standing water first.

When to call a technician

OE returns after those checks.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung dishwasher oE: A gloved, wet hand lifts the cylindrical mesh filter out of the dishwasher sump, with a little water in the basin below and a spray arm lying aside.
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with oE one character at a time: Samsung writes it with a lowercase o and a capital E.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Switch off and drain

    Cut power at the breaker and remove standing water.

  3. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 3

    Check the drain

    Look for a kinked drain hose or a clogged filter.

  4. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Check the inlet

    Make sure the supply valve is not letting water in while the dishwasher is off.

Still showing oE?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

Where a leak is caught.

Conceptual dishwasher sectionTub seam / gasketBase panFloat switchInlet valve1234
  1. 1Tub seam / gasket
  2. 2Base pan
  3. 3Float switch
  4. 4Inlet valve

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

A little more context.

What is a Samsung dishwasher reporting with oE?

Samsung says there is more water in the dishwasher than there should be, and refers to its guide for drain and overflow errors.

Read the supporting manual

What should I check before I book a visit?

Switch off at the breaker, bail out standing water, then check the drain hose and filter, following Samsung's drain and overflow guide.

Read the supporting manual

Can the dishwasher stay in use while this shows?

Extra water can reach electrical parts. Switch off at the breaker and remove the water before inspecting.

Read the supporting manual

How is oE different from the codes near it?

On a small display the o in oE can be taken for 0. Samsung's dishwasher list has no row spelled that way, so oE is the reading to look up. The same characters also appear on a washer, where Samsung ties it to Overflow error. Check which appliance you are standing in front of.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung dishwasher is displaying an error code

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-05-01; no printed revision / article

Scope: Samsung dishwashers, all models unless the article notes otherwise. Source: Samsung dishwasher is displaying an error code (Samsung US support article TSG10004499), checked November 2026. The entry used for oE is printed as: "OC, 0C, oE - Over-level water error" (TSG10004499, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung dishwasher reporting with oE?

Samsung says there is more water in the dishwasher than there should be, and refers to its guide for drain and overflow errors.

Is this the same as the drain error?

They are separate in Samsung's list but both send you to a drain guide: one is water that cannot leave, the other too much water.

Could the inlet valve be letting water in?

Samsung's page does not name a part. Too much water can come from a drain that is not working or from water entering when it should not. Samsung points to its drain and overflow guide for the checks.

What should I do about water already on the floor?

Switch off at the breaker, close the supply valve and mop it up before you test anything. Water and live electrical parts under a dishwasher are a hazard.

Can oE be misread on the display?

On a small display the o in oE can be taken for 0. Samsung's dishwasher list has no row spelled that way, so oE is the reading to look up.

Do I need a visit for oE?

If the drain path is clear and the level is still high, book a visit with us.

Let’s take care of it.

Smart appliances still
need a steady hand.