Inside the appliance
Dishwasher heater. In plain English.
Samsung names the dishwasher heater in two error entries. HC is a high temperature heater error: it is too hot inside. HE is a heater error: the temperature is detected incorrectly. Both start with an empty dishwasher and a Normal cycle; cut breaker power if HE returns.

Where it fits.
Dishwasher heater in the appliance
Samsung's articles do not give the heater's position.
The picture shows a typical example of this component. It does not tell you which replacement fits your model.
What shifts once this system needs attention.
Dishwasher heater problems can arrive with weaker performance or a code that keeps coming back. A component is tested before anyone decides it is to blame.
Owner care, within the model instructions.
Switch the appliance off and unplug it before any check of your own. Look out for pooled water and jagged debris. Never touch a wet plug or an electrical area, take off a service panel or go past what your model's owner instructions allow.
- 1
Cut power for 30 seconds
For HC, Samsung has you drop the dishwasher's breaker for a 30-second pause, then flip it on.
- 2
Empty it
Remove the dishes so the cycle runs unloaded.
- 3
Add detergent and run Normal
Put detergent in the drawer and start a Normal cycle. Watch for the code.
- 4
Keep the breaker off if HE returns
If HE still occurs, cut the dishwasher's breaker before you book.
Cleaning or replacement?
Leave internal testing to a technician.
HE returns after the empty Normal cycle.
HC returns after the breaker pause.
The lights pattern says the dishwasher cannot heat.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Dishwasher heater advice. Choose the manual that fits your model.
- Samsung dishwasher is displaying an error code
- Lights are blinking on the Samsung dishwasher
Follow the user manual for your exact model. See how we research these pages.
What is the difference between HC and HE?
HC is the high temperature heater error: too hot inside. HE is the heater error: the temperature is detected incorrectly. Samsung lists them separately.
Does 1E ever mean the heater?
On Rotary models, 1E and IE are the high temperature heater error. On Waterwall models they mean a clogged fine filter instead.
What do blinking lights say about heating?
Samsung's light-pattern page says some combinations mean the heater is failing, and one says the dishwasher is unable to heat.
Can I test the heater at home?
Samsung offers no home test. It offers a breaker reset, an empty Normal cycle and a service request if the error remains.
Samsung codes, symptoms, parts, house calls
From the message to what comes next.
HC
HC is Samsung's high temperature heater error on a dishwasher: the temperature inside is too hot. Switch the power off at the breaker for 30 seconds, empty it, fill the detergent drawer and run a Normal cycle.
Samsung dishwasher won't turn on
Samsung's article for a dishwasher that does not turn on lists a short set of checks: touch Power with dry hands, wipe a grimy Power button, look for a tripped breaker, and find the wall switch some kitchens have. If it has done this since installation, Samsung says service is not the answer and the installer should check the electrical supply.
Dishwasher repair
Book a diagnostic for your exact model, carried out beside the appliance.
Find your metro
Office details, and the access notes to send us.


