Samsung dishwasher HC / Heating

Samsung dishwasher
error HC

Dishwasher / display referenceHC

HC is Samsung's high temperature heater error on a dishwasher: the temperature inside is too hot. Switch the power off at the breaker for 30 seconds, empty it, fill the detergent drawer and run a Normal cycle.

Also shown as HC

Last reviewed

Dishwasher / display referenceHC
Meaning
HC is Samsung's high temperature heater error on a dishwasher: the temperature inside is too hot. Switch the power off at the breaker for 30 seconds, empty it, fill the detergent drawer and run a Normal cycle.
Who handles it
Technician — close the water supply
Related codes
Source
Samsung dishwasher is displaying an error code

What Samsung dishwasher HC means.

What it means

HC is Samsung's high temperature heater error on a dishwasher: the temperature inside is too hot. Switch the power off at the breaker for 30 seconds, empty it, fill the detergent drawer and run a Normal cycle.

What you can safely check

Cut power to the dishwasher at its breaker before you reach into the base or behind a panel, and clear up any standing water first.

When to call a technician

HC returns after the Normal cycle.

Your Samsung checks, remembered on this device

Safe checks, in order.

0 of 4 checks done
  1. Samsung dishwasher HC: Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display

    Compare the display with HC one character at a time: Samsung writes it with a capital H and a capital C.

  2. A washer control panel with a short code lit on the screen
    Illustration. Follow your model’s instructions.
    Check 2

    Power off at the breaker

    Leave the power off for 30 seconds.

  3. Over a technician's shoulder, hands hold a tablet showing an empty checklist with boxes, a front-loading washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Empty it

    Remove the dishes so the cycle runs unloaded.

  4. A technician testing a control board with a meter
    Illustration. Follow your model’s instructions.
    Check 4

    Run a Normal cycle

    Fill the detergent drawer and start a Normal cycle.

Still showing HC?

Tell us your model and the checks you have already run, then open your request from this spot.

Book a visit

The control and its wiring.

Conceptual dishwasher sectionKeypadControl boardMotor wiringHeater wiring1234
  1. 2Control board
  2. 3Motor wiring

This is a sketch, because the inside of a Samsung changes from model to model. Tap an outlined part for its photo and the matching check.

Parts behind the message.

Open dishwasher with the lower rack pulled out and a black-gloved hand near the heating element at the bottom of the tub

Component reference

Dishwasher heater

Samsung names the dishwasher heater in two error entries.

Read the definition

A little more context.

What is a Samsung dishwasher reporting with HC?

For HC, Samsung says the temperature inside the dishwasher is too hot.

Read the supporting manual

What should I check before I book a visit?

With HC showing, power off at the breaker for 30 seconds, empty the dishwasher, fill the detergent drawer and run a Normal cycle.

Read the supporting manual

Can the dishwasher stay in use while this shows?

Safety with HC: A hot tub can scald. Wait for it to cool before you reach in.

Read the supporting manual

How is HC different from the codes near it?

The same characters also appear on a dryer, where Samsung ties it to Heating errors; and on a washer, where Samsung ties it to Heater Error. Check which appliance you are standing in front of.

Read the supporting manual

The manual behind the message.

Manufacturer document

Samsung dishwasher is displaying an error code

Samsung Electronics America (official US support article, samsung.com/us)

page meta date 2026-05-01; no printed revision / article

Scope: Samsung dishwashers, all models unless the article notes otherwise. Source: Samsung dishwasher is displaying an error code (Samsung US support article TSG10004499), checked November 2026. The entry used for HC is printed as: "HC - High temperature heater error" (TSG10004499, web article).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a Samsung dishwasher reporting with HC?

Samsung says the temperature inside the dishwasher is too hot.

Why empty it first?

Samsung's step is to run the Normal cycle with the dishwasher empty and detergent in the drawer, so any repeat is not down to the load.

Why run an empty Normal cycle?

Samsung's step is a Normal cycle with the dishwasher empty and detergent in the drawer, so a repeat cannot be blamed on the load.

How long should the breaker stay off?

Samsung says 30 seconds. Switching off at the breaker rather than the panel makes sure the controls fully power down.

Does HC mean the same on a dryer?

The same characters also appear on a dryer, where Samsung ties it to Heating errors; and on a washer, where Samsung ties it to Heater Error. Check which appliance you are standing in front of.

Do I need a visit for HC?

If the error occurs again, Samsung says to request service. Book a visit with us.

Let’s take care of it.

Smart appliances still
need a steady hand.