Inside the appliance
Dishwasher fine filter. In plain English.
On Waterwall models, 1E or IE means water is not making it through the filter. Samsung says to clean the fine filter on the floor of the dishwasher. On Rotary models the same code means a high temperature heater error, so the filter step does not apply.

Where it fits.
Dishwasher fine filter in the appliance
Samsung places it low in the dishwasher, in the tub.
The picture shows a typical example of this component. It does not tell you which replacement fits your model.
What shifts once this system needs attention.
Dishwasher fine filter problems can arrive with weaker performance or a code that keeps coming back. A component is tested before anyone decides it is to blame.
Owner care, within the model instructions.
Switch the appliance off and unplug it before any check of your own. Look out for pooled water and jagged debris. Never touch a wet plug or an electrical area, take off a service panel or go past what your model's owner instructions allow.
- 1
Know your model
Samsung prints two meanings for 1E and IE: a clogged filter on Waterwall models, a high temperature heater error on Rotary models.
- 2
Clean the fine filter
On a Waterwall model, clean the fine filter on the floor of the dishwasher. Samsung points to your user manual for the instructions.
- 3
Run it again
If the code returns after the filter is cleaned, Samsung says to request service.
Cleaning or replacement?
Leave internal testing to a technician.
1E or IE returns after the fine filter is clean.
You have a Rotary model, where the code means a high temperature heater error.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Dishwasher fine filter advice. Choose the manual that fits your model.
- Samsung dishwasher is displaying an error code
Follow the user manual for your exact model. See how we research these pages.
Which dishwashers use this step?
Waterwall models. Samsung labels the 1E entry for Waterwall and Rotary models separately.
What does the filter do in Samsung's wording?
Samsung describes the error as water not making it through the filter.
What if my model is a Rotary?
Samsung words 1E there as a high temperature heater error: cut power at the panel for 30 seconds, empty it and run a Normal cycle.
When do I book?
If 1E or IE returns after the fine filter is cleaned or after the Rotary steps. Bring the model number.
Samsung codes, symptoms, parts, house calls
From the message to what comes next.
Samsung dishwasher 1E error code
1E on a Samsung dishwasher has two meanings by model. Waterwall models: water is not getting through the fine filter, so clean it. Rotary models: the inside is too hot, so cut power at the breaker for 30 seconds, empty it and run a Normal cycle.
Samsung dishwasher won't turn on
Samsung's article for a dishwasher that does not turn on lists a short set of checks: touch Power with dry hands, wipe a grimy Power button, look for a tripped breaker, and find the wall switch some kitchens have. If it has done this since installation, Samsung says service is not the answer and the installer should check the electrical supply.
Dishwasher repair
Book a diagnostic for your exact model, carried out beside the appliance.
Find your metro
Office details, and the access notes to send us.


